We are the manufacturer and exporter of non-pressure series solar water heaters, pressurized series solar water heater, solar evacuated tube collector U pipe with solar keymark, solar vacuum tube collector heat pipe, All-glass evacuated solar collector tubes. We are a hi-tech enterprise which is specialized in research and application of solar energy and manufacture of solar water heaters and solar collector.
--------------------------------------
The characteristic of the separate pressurized solar water tank/cylinder:
1.The upright tank can make the water temperature to different level.It can hot the top water instantly.The special structure can reduce the cold and hot water to mix together.
2.The tank inside the building,the connection pipe between the tank and water tap is very short,so that hot water can be used instantly and seldom cold water flows out.
3.The tank inside the building,the hot water lose less energy than the normal one.
4.The heater collector and the water tank is separated,that makes the system combine with the building perfectly,which will not reduce the sightseeing for the building and the environment around.
5.Back up with electric heater so that in the day without sunshine hot water can also be used.
6.Capacity:100L,150L,200L,300L
Details for the material of separate pressurized solar water tank:
Inner tank:stainless steel SUS316L-1.2mm inner tank.
Outer tank:painted steel-0.4mm
Insulation:Polyurethane-45mm.
Remark of this separate pressurized solar water tank:
1. The use pressure: <6 bar
2. The test pressure: 10 bar
3. The accessary:
a.electrical heater
b.magnesium bar
c.the temperature and pressure relief valve
d.the sensor
e.the copper coil heat exchanger: standard equip with one, can select two coil that the tank
capacity up to 200 L.
Keywords: solar water heater,separated pressurized solar water heater, solar thermal water heater, solar energy, split solar water heater, separate solar water cylinder, split pressurized solar water heater tank can work with boiler