Characteristic: a.Full new appearance,beautiful and elegant,occupy small area; b.Overall machine adopts Sanyo electric machine in connection with incline gear face decelerator drive,running calm,noise is extremely small; c.Deep slot U shape bird leading type convey construction,film after multi-layer extrusion has higher image quality. d.Full mould fabrication, characteristic stablised; e.High automatization,ready to feed film right after switch on; f.After feeding the film,automatic equipment starts the following components: 1)Drive electrode 2)Fans 3)Electricity heater 4)Medicine fluid supplying system In 3 minutes after the last film comes out,all the above-mentioned components will stop working automatically saving energy.The only unchanged thing is the developing temperature. Application: X-ray film developing,MRI,CT,DSA,laser printing reflect arranging, portable X-ray film develop Parameter: 1.developping film type:x ray,CT,MRI,DSA etc soft film 2.Specifiction for use:5" x 7"-14" x 17" 3.Film developping speed:180s-250s no grade adjustable 4.Film developping capacity:12" x 15" 40pcs/hour 5.Film treat specification:maximum width:14"(358mm) minimum length:4"(100mm) 6.Environment temperature:5C-30C relative humidity:85% 7.Film developping medicine liquid temperature control scope:25C-35C dry temperature:50C 8.Medicine slot volume:develop 2.6L,flexation 2.6L bath 2.6L 9.power:1.5kw 10.Gross weight:27kg 11.Power supply:220v/50hz (Portable emergency power is available if need) 12.Profile specification:600 x 545 x 530 (length x width x height)