PSK, TSK and GSK Graphite are available as round rods and rectangular blocks with relatively fine grain size, and have good mechanical, electrical and thermal properties, with low ash content. Density, mechanical strength and oxidation resistance can be improved by means of further impregnation. They can be used as furnace lining and electric material for metallurgy furnace, such as SiC Furnace, Graphitized Furnace, and for impervious graphite exchanger and graphite moulds. Graphite disk is used as Graphite equipment, Graphite seal nipple and Carbon brick for chemical industry. 1) PSK Max Grain Size 3.0mm 2.0mm 1.0mm 0.8mm Apparent Density 1.60g/cm3 min Specific Resistance 9uohm. M max Flexural Strength 7.8MPa min Compressive Strength 20.0 MPa min (100C degree)C. T. E. 2.3 max 2)TSK Max Grain Size 3.0mm 2.0mm 1.0mm 0.8mm Apparent Density 1.68g/cm3 min Specific Resistance 8.5uohm. M max Flexural Strength 13.5MPa min Compressive Strength 28.0 MPa min (100C degree)C. T. E. 2.3 max 3)GSK Max Grain Size 3.0mm 2.0mm 1.0mm 0.8mm Apparent Density 1.72g/cm3 min Specific Resistance 8.5uohm. M max Flexural Strength 15.0MPa min Compressive Strength 33.0 MPa min (100C degree)C. T. E. 2.3 max Rectangle Types: 400*400*1850, 500*500*2100, 350*400*1350, 400*400*1650, 450*450*1900, 570*200*2100, 550*350*3100, 550*550*1900, 380*380*2100, 550*350*2600, 540*200*2100, 400*600*2200, 880*400*1800, 650*350*2500, 650*650*2200 Graphite Rod Dia55-250*1800 Graphite Disk Dia420*350-508, Dia530*350-508, Dia630*350-508, Dia730*350-500, Dia830*350-500, Dia890*370, Dia930*350-500, Dia1000*350, Dia1040*350, Dia1090*350, Dia1200*350, Dia1340*350, Dia1420*350, Dia1520*350, Dia1620*350, Dia1830*350, Dia2000*350