The Outer Tape T-200 series is cold applied Protection Tape coating systems for Protection of the pipe and its T-100 Series surface from damages. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Product Advantages:
- Heavy duty adhesive.
- Conformable to irregular shapes.
- No release liner.
- Established in ground history.
- Complies with AWWA (American Water Works Association) C-214 standard.
- Compatible with general coating systems
T-200 Outer Tape (Protection Tape, Protection Tapes, Protect Tape) series Coating Systems with AWWA C-214 Standard:
|
Type of Protection Tape: |
T-240 |
T-250 |
T-265 |
T-280 |
T-2100 |
T-2130 | |||||||
|
Thickness: (ASTM D 1000) |
Total |
mm |
mil |
mm |
mil |
mm |
mil |
mm |
mil |
mm |
mil |
mm |
mil |
|
0.38 |
15 |
0.51 |
20 |
0.64 |
25 |
0.76 |
30 |
1.02 |
40 |
1.27 |
50 | ||
|
Film |
0.28 |
11 |
0.38 |
15 |
0.51 |
20 |
0.63 |
25 |
0.64 |
25 |
0.76 |
30 | |
|
Adhesive |
0.10 |
4 |
0.13 |
5 |
0.13 |
5 |
0.13 |
5 |
0.38 |
15 |
0.51 |
20 | |
|
Tensile: |
29 lbs/in |
39 lbs/in |
39 lbs/in |
53 lbs/in |
66 lbs/in |
78 lbs/in | |||||||
|
Length: |
60 Meter |
50 Meter |
40 Meter |
30 Meter |
25 Meter |
20 Meter | |||||||
|
Width: |
2, 3, 4, 6, 9,12 | ||||||||||||
|
Colour: |
Black, White, Red, Blue, Purple, etc. | ||||||||||||
|
Elongation: |
300% | ||||||||||||
|
Adhesion to Inner Layer T-100 (ASTM D 1000) |
46 oz/in, 5N/10mm | ||||||||||||
|
Cathodic Disbandment: (ASTM G8) |
0.25 in radius 6.4 mm | ||||||||||||
|
Water Vapor Transmission Rate: (ASTM F1249) |
0.2g/100in2 /24h, 0.3mg/cm2/24h | ||||||||||||
|
Water Absorption: (ASTM D570) |
≤ 0.1 | ||||||||||||
|
Volume Resistively: (ASTM E257) |
2.5 X 1012 ohm·cm | ||||||||||||
|
Dielectric Strength: (ASTM D 149) |
40 KV | ||||||||||||
|
Temperature Range: (Normal in Ground Service) |
-30 to 160 oF, -34 to 71oC | ||||||||||||