The T-300 series is cold applied Pipe tape coating systems for anticorrosion of field joints, fittings, and specifically piping. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Product Advantages:
- Heavy duty adhesive.
- Conformable to irregular shapes.
- No release liner / release liner.
- Established in ground history.
- Complies with AWWA (American Water Works Association) C-214 standard.
- Compatible with general coating systems.
T-300 Joint Tape (Pipe Tape, Tape for Pipes, Tape for Pipe) Series Coating Systems with AWWA C-214 Standard:
|
Type of Joint Tape (Pipe Tape) |
T-365 |
T-380 |
T-3100 |
T-3130 | ||||
|
Thickness (ASTM D 1000) |
mm |
mil |
mm |
mil |
mm |
mil |
mm |
mil |
|
0.64 |
25 |
0.76 |
30 |
1.02 |
40 |
1.27 |
50 | |
|
Tensile: |
31 lbs/in |
31 lbs/in |
41 lbs/in |
52 lbs/in | ||||
|
Length: |
40 Meter |
30 Meter |
25 Meter |
20 Meter | ||||
|
Width: |
2, 3, 4, 6, 9,12 | |||||||
|
Colour: |
Black, White, Red, Blue, Purple, etc. | |||||||
|
Elongation: |
300% | |||||||
|
Peel Adhesion to Prime Pipe: (ASTM D 1000) |
230 oz/in, 25N/10mm | |||||||
|
Cathodic Disbandment: (ASTM G8) |
0.25 in radius 6.4 mm | |||||||
|
Water Vapor Transmission Rate: (ASTM F1249) |
0.2g/100in2 /24h, 0.3mg/cm2/24h | |||||||
|
Water Absorption: (ASTM D570) |
≤ 0.1 | |||||||
|
Volume Resistively: (ASTM E257) |
2.5 X 1012 ohm·cm | |||||||
|
Dielectric Strength: (ASTM D 149) |
40 KV | |||||||
|
Temperature Range: (Normal in Ground Service) |
-30 to 160 oF, -34 to 71oC | |||||||