1. New film-less(none outline border/decal 'halo') type water-slide transfer decals, special for coated/uncoated metal, carbon materials ,glass, ceramic,---.suitable for toys-model, golf /fishing rods, metal sports goods, tennis rackets, bicycle parts, most of metal parts, glass, ceramic,----decorations. 2. Suitable for curve or any difficult printing shape surface, good durability by curing around 80 degree Celsius for metal/carbon.It's very good adhesion by most pre-clear coating treatment,but excellent durability after final clear coating. 3. Options: Soak transfers into water few seconds, place wet transfers on substrates & squeegee to push the bubbles underneath the transferred decals before take off the top printed clear carrier. After push out the air bubbles, water, thoroughly then let it air dry or on oven/dryer at low temperature under 50 C degree, before clear coating please be sure use rag gently wipe surface to remove the residual-gum of water slide paper after take off the top printed clear layer. Be sure totally substrates dried, and then spray your protective coating finally. 4. The new film-less decal water slide transfers was good adhesion without protective coating when curing at 80 Celsuis degrees for 20 minutes. 5. Samples with customers' registered trademarks, logos and diagrams are for demonstration only and not available for sale.