Hipot & Insulation Tester proceeds insulation resistance and Hipot test at the same time, and has selection mode for manual / auto operation. The current is figured out on the Current Meter. Insulation tester can be easily preset able and automatically decided. This tester has various signals input/output functions for the connection of other device/auto line. Common Specification: Items Hipot Tester Insulation Tester Ac power source AC 110/220 V ?10 %, (50 ~ 60 Hz) AC 110/220 V ?10%, (50~60 Hz) Output Voltage Mode 1 AC 0 ~5 kV Mode 1 DC 500 V ----------------- Mode 2 AC 0~2.5 kV Mode 2 DC 1000 V Current Limit Max. 19.19 mA by 0.01 mA step -------------------- Test Range ----------------------------------- For DC 500 V, 0~1000 M Ohm For DC 1000V, 0~2000 M Ohm Decision Method Auto Decision (Good/Bad) Auto Decision (Good/Bad) Test Procedure Good/Bad Decision) Preset able Preset able Signal Input and Output Bad, Reset ,Enable, Real time test, GND open protect Bad , Enable ,Test ON Benefits: . Reliable and accurate test result ? Removing of arc by Arc Detector ? Removing unnecessary impulse (SSR) Zero Cross Detect Method) instead of Relay contact. ? Prohibition of noise or disoperation by photo coupler for the connection of other device. ? Calibration Report (ISO 17025