The distinctive feature of the BX-S1 is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine. Settings: a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor National(JAPAN) d).Other electric parts are all world-famous brand Features: A.Stable performance with advanced B.Conveying preforms automatically with conveyor. C.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E.High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H.Strong clamping force with high pressure and increasing pressure to lock the mold. Model BX-S1 Theoretical output Pcs/hr 1600-2200 Container Container Volume L 0.2-2.25 Preform inner diameter mm ?6-?0 Preform inner diameter mm ?0-?00 Container height mm 350 Molding Cavities Pc 2 Max.mould thickness mm 240 Max.mould plate dimension(LxW) mm 320x480 Main Machine Mould opening stroke mm 120 Clamping force KN 200 Dia.of the stretching rod mm 12-14 Distance of stretching mm 320-350 Temperature controlling zone Pc 8 Power KM 10 Voltage/frequency V/Hz 380-240-110/50-60(3-PHASE)+N Main machine size mm 1800x1100x1700 Weight T 1.5 Air Comperssor Low pressure compressor - 0.8/m3/1.25Mpa H