Introduction The products are made of metallized poropylene film,non-inductive construction,special metal spray technics, resistance inside seal with epoxy resin and fetch out by tinned copper wire. Characteristic High stability Good frequency property Small size Good Self-healing property Withstand heavy current Usage Widely used in power electronic equipment,spot-welder, resistance welder ,inversion power and also induction heater for GTO snubber. Reference Standard IEC61071 GB17702.1 CGE STANDARD Specification Operating temp range -40℃~+85℃ Capacitance 0.01~2μF Capacitance tolerance ?%(J) Rated voltage 600~3000V.DC(50KHz) Withstand voltage 1.75UN/60S Dissipation factor tgδ≤0.0005(at 10KHz) Insulation resistance ≥300MΩ(at20℃100V.DC) Withstand strike current ability dv/dt>1000v/us Flame retardation UL94V-0 Stray inductance ≤60nH Dimensions Capacitance(uF) R(Ω)(W) W(mm) H(mm) T(mm) dv/dt(V/uS) Irms(A) Rs(mΩ) 0.47 20Ω/10W 42.5 35.5 33.5 1200 19 3.3 0.68 10Ω/15W 42.5 35.5 35.5 1200 20 2.7 1 4Ω/20W 42.5 45 33 1100 25 2.1 1.5 2Ω/30W 57.5 45 30 1100 27 2.1 2 2Ω/40W 57.5 50 35 1000 31 2.0 Special requirements can be designed at the request of customers