APPLICATION This unit is ideal for cutting various log roll materials such as PVC/OPP/PE/Masking tape/Double-side tape/Plastic films...etc. FEATURES 1. Cutting shaft and circular blade are driven by A.C motor with inverter control, which is able to set running direction obverse/reserve on different requests. 2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement. 3. All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting. 4. Central control system is as PLC unit, it can cut various sizes on one log roll by changing modes automatically. OPTIONAL PARTS: 1. Other Size Cutting Shaft: It can be made as per the required core I.D. 2. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big. 3. Safety Cover: To protect operator during the production, this is compliant to the CE regulation. MAIN TECHNICAL PARAMETERS: Valid Width 1000mm/1300mm/1600mm Max. diameter material 270mm (300 mm) Max. cutting speed 35cuts/min Inside diameter of paper core 32-76.2mm Main motor 5 HP Blade drive motor(Servo motor) 3 HP x 6 P Blade diameter 150-350 mm Blade speed 360-1800 rpm Optional Parts: 1. Other Size Cutting Shaft: It can be made as per the required core I.D. 2. Cutting Supporter: For supporting log roll when cutting core below 38mm. 3. Air Type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big. 4. Safety Cover: To protect operator during the production, this is compliant to the CE regulation. 5. Special Introduction: This model has design of obverse/reverse type frame, 1 operator can use both machines for bulk production if set up 2 machines face to face. 6. Sharpening Device: Grinding knife on the machine to save time for taking blade off.