1.Aggregate bunker is designed and manufactured as per related DIN norms to operate under heavy working conditions for long time. There exist 4 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. 2.Aggregate weighing belt conveyor, which has weighing capacity of net 6,4 tons (net 4 m3) with ?5 kg sensitivity, manufactured to operate without any problem under heavy working conditions with mechanical separator, every kind of safety precautions, air pressure measuring device and etc. as per world conditions . Aggregate is weighed by 4 units of load cells and weighing belt conveyor has all safety switches like; sensor for break off of belt, rope controlled safety switch, emergency stop button and switch that prevents belt slides. 3.3- MAIN CHASSIS SUPERSTRUCTURE [Back to top] Plant chassis, which provides 4250 mm useful height, is produced from section - profile and sheet iron, according to ISO9001 and all related DIN norms. Below listed cement weighing and water weighing hoppers are mounted on a separate removable chassis placed on the mixer chassis and equipment with ladder platform and parapets. 4.Singe shaft mixers are easy to operate and long life mixers with very strong spiral shaped mixing arms, compact structure and provide fast mixing, practical loading. Internal linings made from nickel alloyed cast material provide production of 500.000 m3 of concrete when adjusted and used carefully. mand and control operations are done by PLC. At the maximum capacity high weighing and dosage sensitivity can be achieved by advanced PLC programs and error control algorithms. - MCC and command panel is manufactured up to heavy operating conditions and has all kinds of electrical protection. - All kinds of parameter setup, receipt and calibration operations can be done on operator's panel screen; process, production and failure information can be taken. - Manuel and automatic operation can be done on illuminated mimic diagram. Voltage and current values can be followed by digital indicators on the panel. 6.All command and control operations, all kind of reporting, failure indications and etc are done by PC Monitor and animation support with PC, prin