Use The EFS 8241 test bench is part of a new generation of test benches designed for calibration or endurance tests of diesel injection devices. It can drive up to 8 injectors with 8 EMI2 units. It takes up very little floor space, while incorporating all the necessary control devices and offering some very advantageous features for the user : Large work surface. Easy access via the two glassed-in doors. Equipment modularity. High pin rotation speed, precise electronic regulation. High drive torque. Easily accessible, high-capacity oil tank. Permanent oil circulation, ensuring a stable temperature regulation. Very fast fluid temperature regulation. Easy maintenance. Safety Active protection of the installation : Automatic door locking with controlled door opening. Pin motor monitoring. Test fluid temperature monitoring. Primary tank low-level detection. Waste oil tank high-level detection. Two emergency punch-stop buttons. Automatic closure of water circuit (by electro-valve). Technical features Tubular steel structure fitted with removable closing panels. Thermoset epoxy coating. Standard colour = RAL 7035. Other RAL colours according to customer specifications. USER WORKING CABIN : Working surface : 1.4 m2 (l : 1090 x L : 1180). Working volume : 1.2 m3 (h : 900). It can be modularized, depending on the specification needs. Accessible through two glassed-in, removable doors. Locking protection at opening by safety contactors. Stainless steel primary oil tank and circuitry. Distribution of fluids through 10 openings (BSP 3/4"). Cable-pass trap doors and ducts for the necessary working cables. Lighting provided by a safety fluorescent tube. DRIVE SYSTEM : High torque "brushless" motor, driven by a vector speed regulator. No inertial flywheel. Very good speed stability. Motor power : 8 KW to 28 KW, depending on the specification needs. Maximum speed : up to 6000 rev/min. Motor Torque : up to 140 Nm (from 0 to 1940 rpm). Coupling device for axis diameter 55 mm with protective cover. PUMP SUPPORT : Pump's support is designed to accomodate both : - High pressure (HP) pumps for common rail systems. - In-line pumps for mechanical injection systems. Support length = 800mm, width = 300mm, wi