CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality Components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
|
Main part: | ||
|
Pneumatic part |
Valve |
SMC |
|
Cylinder | ||
|
Electric part |
PLC |
LG Mitsubishi |
|
Operating system |
LG /HITECH | |
|
Relay |
OMRON | |
|
Infrared thermometer |
America Raytek | |
|
Note |
All of the electrical components adopts CE、UL、CCC approved international advanced high-tech product. | |
|
Main parameter: | ||
|
Model |
CM-A2 | |
|
Productivity |
Depend on bottle design |
1800-2000PCS/H |
|
Product type |
Body diameter |
20mm-100mm |
|
Height |
50mm-350mm | |
|
Neck diameter |
15mm-38mm | |
|
Mold |
Cavity |
2cavities |
|
Mold thick |
240mm | |
|
Mold |
500*500mm | |
|
Main machine power |
Electrical source power |
380v 3Phase /220v 3Phase 50/60HZ |
|
Power |
25kw | |
|
Really use power |
6kw | |
|
Air source |
LP air compressor |
1.0m3/min 1.0MPa 1set (7.5KW) |
|
HP air compressor |
0.7m3/min 3.0MPa 2sets (each set 9KW) | |
|
Air dryer |
1.0m3/min 3.0MPa 1set | |
|
Cooling water |
Cooling water |
10L/min |
|
Size |
L*W*H |
1908*1280*1920mm |
|
Weight |
2000kg | |
|
Auxiliary equipment（preform unscrambler） |
L*W*H |
276*106*186mm |
|
Weight |
250kg | |
|
Resin available |
|
PET |