CM-A1 Full automatic blow molding machine is suitable for producing PET, PE, PC and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
|
Main part: | ||
|
Pneumatic part |
Valve |
SMC |
|
Cylinder | ||
|
Electric part |
PLC |
OMRON |
|
Operating system |
OMRON | |
|
Relay |
OMRON | |
|
Note |
All of the electrical components adopts CE、UL、CCC approved international advanced high-tech product. | |
|
Main parameter: | ||
|
Model |
CM-A1 | |
|
Productivity |
Depend on bottle design |
600-1200PCS/H |
|
Product type |
Body diameter |
60mm-150mm |
|
volume |
0.1-5L | |
|
Neck diameter |
15mm-38mm | |
|
Mould |
Mold thickness |
100-250mm |
|
Main machine power |
Electrical source power |
380v /220v 50/60HZ |
|
Power |
11kw | |
|
Really use power |
3kw | |
|
Air source |
HP air compressor |
1.2m3/min 3.0MPa |
|
Precision air filters |
1 Precision sir filter | |
|
Machine size and weight |
Main machine dimension(L×W×H) |
1900×800×1800mm |
|
Pre-form Unscrambler(L×W×H) |
1100×800×1700mm | |
|
Main machine weight |
0.72T | |
|
Pre-form Unscrambler |
0.05T | |
|
Cooling |
3 HP Water Chiller (Water chiller is used to cool the machine and blow mould) | |
|
Resin available |
|
PET |