Slant bed CNC lathe (SL-360) Features: 1. The bed is designed with an angle of 45 degree and full shielded, it is easy to remove the chips and operate. 2. 8-position tool post and tailstock move on different guide-way, no interference for each other. 3. The integrated base is cast by resin sand pattern, so the machine tool is high rigidity and good in anti-vibration and accuracy, rear chip conveyor can be selected. 4. High speed turning and constant line speed turning can be done because the frequency stepless speed motor and liner rolling guide way is adopted. 5. The ball screw is mounted on the middle of the saddle, the continuity of accuracy is better than others, as the servo motor and the ball screw are connected directly, having simple driving chain, keeping transmitting accuracy, high connection-rigidity and low noise. 6. The 8-position tool post can process the complex components. Hydraulic chuck and tailstock is standard of ACC, effectively increase the automatic dictionary of the machine tool and lower the labor of operation. 7. There are advanced (i type) and economical (E type) models to meet the various requirement of different customers. 8. As customers requested, can select chip conveyor, work piece collector, bar feeder and optional accessories etc. Technical Parameter of SL360 Item Content Specification SL-360E SL-360i Capacity Max. swing over bed mm φ 360 Max. swing over cross slide mm φ 220 Max turning dia. mm φ 180(shaft) Max. turning length of work piece mm 310 Spindle Spindle speed r/min 100-4000 Inverter motor Hz 5H z-180Hz Max spindle torque output Nm 47 ( 5.5kw ),64(7.5kw) Spindle nose/ dia of spindle bore mm A2-5/φ52 Dia. Of draw bar mm φ 40 Size of hydraulic chuck mm Standard:φ160(6")solid Option:φ160(6")hollow :φ200(8")solid Traverse Max traverse of X, Z mm Electric turret:X:110,Z:310 gang tool:X:260,Z:310 Rapid traverse of X, Z m/min X,Z:16 Motor Main spindle motor Kw Standard:5.5kw( inverter ) Option:7.5kw( inverter ) X,Z( Servo motor) Kw/N.m X:1.05/5 Z:1.57/7 X:1.2/7 Z:1.2/7 Turret Type of turret / Horizontal power turning turret or gang turret Station of turret 位 Standard:Power 8 station,option:gang Size o
