Property
non-3D  formulation; Metallic paste 922      85%     90% Silver powder/ flake     15%     10%
3D  formulation; Metallic paste 922     50% Silver powder/ flake     50%
Application
1. 40-60 mesh is suggested when printing, be sure tighten the screen mesh, then to apply photoresist ink 4-5 layer till the thickness reach 1-1.5mm,
2: Don't have the screen to touch the fabirc, be sure to keep 2-3mm.
3: Normally 5-8 times printing is necessary,  to cure 1-2 minutes after finish printing at 130-150℃
4. For improving the fastness, please apply pc100 properly.
Storage:
Don't store in direct sunshine or at high temperature.
Stir paste for 5 minutes before using for the first time.
Eco-information
Non eco-friendly
Attention:
We suggest to conduct the test before mass production for dark fabric and high elastic fabric.
this paste can't be mixed together with non-EVA paste.