Overview
MDO-OTM Modular Integrated Optical Multiplexer, with 4/816*E1+100M capacity, provides 4*modular slots for various function modules such as voice, data and video services It is applicable to all kinds of data, voice and video transmission area.At the same time, it also provides sufficient network management interface function and realizes SNMP network management or device management via hyper terminal. The device itself is supplied with a LCD displayer for user to carry out configuration and management.
MDO-OTM Modular Integrated Optical Multiplexer integrates modular and strong functionalities, low in cost and convenient for use and expansion. Multi-protocol interfaces have been integrated in one device to facilitate multi-service access and transmission, able for connection with communication networks of an enterprise distributed in different parts. It has been proved to be applicable to all kinds of data, voice and video traffic applications in experiments of different China Mobile, China Unicom, China Netcom and army terminals.
Features
1+1 redundancy optical interface ensure reliable transmission. Support various function modules for voice, data and video transmission (N*64K V. 35, FV. 35, FXO/FXS, E/M, RS232/RS485, and etc. ) Provide SNMP channel& NMS network software (IView) With the LCD display in the panel of the device, also cancontrol and configure the device
Support 2*100Mbps Ethernet interface
Provide 1*RS232 data interface
Support ALS function
Fully alarm system, display local/remote device working status
Specification
E1 Port
Rate: 2.048Mbit/s
Connector: DB37
Impedance: 75ohm unbalanced / 120ohm balanced
Standard: ITU-T G. 703, G. 742, G. 823
Optical Port
Rate: 155M bit/s
Wavelength: 1310/1550 nm
Transmission distance: 0-40km(up to 120km)
Ethernet Port
Rate: 10/100M
Connector: RJ45
Standard: IEEE 802.3
Operation Environments
Power supply: 220VAC/-48VDC
Working Temperature: -5 Centigrade-40 Centigrade
Storage Temperature: -25 Centigrade-55 Centigrade
Humidity: D85 %
Size: 440mm *43.5mm * 220 mm
MDO-OTM Modular Integrated Optical Multiplexer, with 4/816*E1+100M capacity, provides 4*modular slots for various function modules such as voice, data and video services It is applicable to all kinds of data, voice and video transmission area.At the same time, it also provides sufficient network management interface function and realizes SNMP network management or device management via hyper terminal. The device itself is supplied with a LCD displayer for user to carry out configuration and management.
MDO-OTM Modular Integrated Optical Multiplexer integrates modular and strong functionalities, low in cost and convenient for use and expansion. Multi-protocol interfaces have been integrated in one device to facilitate multi-service access and transmission, able for connection with communication networks of an enterprise distributed in different parts. It has been proved to be applicable to all kinds of data, voice and video traffic applications in experiments of different China Mobile, China Unicom, China Netcom and army terminals.
Features
1+1 redundancy optical interface ensure reliable transmission. Support various function modules for voice, data and video transmission (N*64K V. 35, FV. 35, FXO/FXS, E/M, RS232/RS485, and etc. ) Provide SNMP channel& NMS network software (IView) With the LCD display in the panel of the device, also cancontrol and configure the device
Support 2*100Mbps Ethernet interface
Provide 1*RS232 data interface
Support ALS function
Fully alarm system, display local/remote device working status
Specification
E1 Port
Rate: 2.048Mbit/s
Connector: DB37
Impedance: 75ohm unbalanced / 120ohm balanced
Standard: ITU-T G. 703, G. 742, G. 823
Optical Port
Rate: 155M bit/s
Wavelength: 1310/1550 nm
Transmission distance: 0-40km(up to 120km)
Ethernet Port
Rate: 10/100M
Connector: RJ45
Standard: IEEE 802.3
Operation Environments
Power supply: 220VAC/-48VDC
Working Temperature: -5 Centigrade-40 Centigrade
Storage Temperature: -25 Centigrade-55 Centigrade
Humidity: D85 %
Size: 440mm *43.5mm * 220 mm