System function:

Main function:

（1） Single arm manipulator automatic controller

（2） Advanced micro-processor

（3） Chinese and English interface

（4） Total 100 modes including 8 standard modes

（5） 80 modes could be teached

（6） mold could be set

（7） 12 error record are stored

（8） Total cycle is stored

Main standard：

（9） Input power : 220VAC/50Hz~60Hz±20%

（10） Power < 50W

（11） Temperature 0-600C

（12） Humidity 35%-90%

（13） Output 12 points， max: 200mA/DC24V

（14） Input 10 points， max: 6. 3mA/点

Security standard:

（15） (1) The controller can be used for 10 years at most if relays, adjacent switches, valves are replaced in time.

（16） Relays should be replaced after they have been used for 500 thousand cycles.

（17） Replacement of other sensors refer to their illumination.

Self-Diagnostic Functions: If trouble occurs, the operator is alerted by an alarm sounding and the trouble is displayed on the control panel.

The arm features anti-drop in case of insufficient air pressure or power failure.

Fast Motion: The product extract time is only 0. 6-0. 8 second. Entire cycle time is about 4 seconds.

High positioning accuracy and high stability. The robot is precision constructed throughout. All strokes have shock absorbers.

In the event of gripping failure, the operator only needs to open the safety door, take out the product and close the safety door. Then machine motions will restart automatically with no resetting necessary.

The arm can be quickly swiveled to 90￠X forward and backward.