N.S.
Protective Ceramic Coatings for Concrete:
Formulated for the
extremely large market of Factory Floors/Loading Docks/Marine Docks; Highway
Bridge Decks, etc. where extreme wear is common and heavy-duty protection is
required. Excellent wear protection from mechanical attack, such as high
abrasion, high impact, high heat, etc.
Benefits and Applications
Include:
Superior Mechanical Strengths
Compression.
Impact.
Abrasion
resistance.
Highly stable to thermal expansion/contraction.
Impervious to
thermal shock.
Highly resistant to freeze-thaw cycling.
Exceptional
Corrosion Protection Including Hydrofluoric Acid:
Corrosion resistance across
ENTIRE pH RANGE.
Water proof.
Weatherproof.
UV stability - 100%.
VOC
emission - Zero. Non-Toxic.
N.S. has a durability span of 20 years or
more.
Anti-slip surface.
Adhesion to steel and many other metals: 800 -
1500 psi.
Adhesion to Stainless Steel: 500 - 600 psi (Stainless Steel formula
is available as a Special Order).
Fireproof. Temperature Resistance: 2900
degrees F. (Special grade available to 4000 degrees F.).
Preparation and
Application:
Surface preparation: Concrete - no oil/grease/fats. Acid-etch
may be required for very smooth (cement-rich mixture, or cement cap) concrete.
Metals - no oil/grease/fats.
Application Methods: Cement/concrete helicopter
trowel machine; Hopper gun; Screed; Hard trowel.
Application Coverage: 30 -
250 sq. ft. gallon depending upon surface porosity and application
method.
Positive Insurance rate reductions may be possible.
N.S. Special
Applications
Insulation of Steel Beams/Girders/Piping
Used in construction
of buildings. Steel can transmit heat from basement fire to the roof, setting it
on fire. Code calls for cladding to insulate steel to reduce fire transfer
probability. Most competitors apply their material up to 3-4 inch cladding
thickness or more, resulting in a very time and labor-intensive
application.
NOTE: When N.S. coating is combined with our Proprietary
Additives and is applied to steel substrate by spray gun at approximately 1/8
thickness. The N.S. coating then expands shortly after the application to a
thickness of up to 1.5, providing exceptional insulating and fireproofing
qualities.
Fire/heat transfer prevention is excellent.
All N.S.
applications are Pigmentable, using inexpensive iron oxides.
Chemical
Corrosion Resistance: Excellent. Protects against Hydrofluoric Acid to 27%
concentration.
Typical cure time to use ranges from 5 minutes to 1-1/2 hours
depending upon thickness.
Cure time is controllable.