Bullet Proof Graffiti
Armor
Bullet-Proof utilizes
revolutionary nanotechnology and is a high-performance, highly fluorinated and
durable NON-SACRIFICIAL coating formulated for applications requiring extremely
high-slip characteristics and chemical resistance. This Bullet-Proof exhibits
outstanding, long-lasting performance properties. This product is the world’s
first graffiti deterrent coating as most spray paints, lacquers, enamels and
adhesives chemically can not stick to it. When a tagger attempts to vandalize a
surface protected with the Seal America’s Bullet Proof Graffiti Armor, the
taggers paint will crawl together and run off the surface. Bullet-Proof is a
penetrating, non-yellowing, non-whitening, non-toxic, permanent weather-proofing
and Anti-Graffiti treatment. The product is highly resistant to hydrocarbons,
graffiti, ozone, salt spray, acid rain, and a wide variety of chemicals and is
VOC and AQMD compliant. The fluorinated
polymer makes this coating impervious to UV degradation.
This Product exhibits outstanding weathering characteristics by allowing for
expansion, contraction, building movement and temperature extremes. The product
will allow moisture vapor to escape while not allowing moisture to enter the
structure. Bullet-Proof is ideal for architectural masonry, stone, wood,
fiberglass, carbon fiber, ferrous and non-ferrous metals, glass, brick, masonry
and concrete applications. Bullet-Proof provides a high quality finish in
either glossy or matt, and offers exceptional performance.
Meets all
Bullet-Proof is non-toxic, , environmentally friendly, non-reactive and has a HMIS B Rating for Personal Protection. Bullet-Proof is a two component coating system supplied in two separate containers. Good surface preparation and cleaning of all substrates to be coated is essential for optimum performance of the coating system. All surfaces to be coated should be clean, dry and free from contaminants. For optimum appearance properties, spray two coats to a minimum of 2 mils DFT/50 microns DFT. Always allow each coat to “flash off” to a tacked state prior to applying a following coat. Refer to label for additional detailed instructions.
MATERIAL SAFETY DATA SHEET
Bullet Proof Graffiti Armor
PRODUCT IDENTIFICATION:
Product Name: Bullet Proof Graffiti Armor
USE: Anti-Graffiti
Synonyms: N/A
Formula: Proprietary
Latest Revision Date: 03/27/04
Print Date: 02/21/05
24-hour emergency telephone number
866-369-6289
This MSDS complies with 29 CFR 1910.1200
(The Hazard Communication Standard)
HAZARDOUS INGREDIENTS
Component CAS Number OSHA/TEL ACGIH/TLV Other Weigh
Methyl N-AmylKetone 110-43-0 50 ppm 50 ppm 0-35%
Acetate 106-74-1
Ketone 108-10-1 50 ppm 50 ppm 25 ppm 1-5 %
STEL Titanium Dioxide 13463-67-7 10 mg/m3 10 mg/m3 0-20%
PHYSICAL and CHEMICAL CHARACTERISTICS
- Boiling Point:
115 - 160 deg C
- Vapor Density:
Heavier Than Air
- Evaporation Rate:
Slower Than Ether
- Coating VOC: 190
Grams per mixed gallon
- Solubility in
Water: Negligible
Appearance: White viscous
FIRE AND EXPLOSION HAZARD DATA
- Flash Point: 45
deg C (SETA)
- Lower:1.1% Upper:
7.9%
- Extinguishing
Media: Water Fog, Foam, Alcohol Foam, C02, Dry
Chemical
Special fire fighting procedures: Full emergency equipment
self-contained
breathing apparatus and full protective clothing should be worn by
fire
fighters. Avoid spreading burning liquid with water. Fight fire
from safe
distance. Shut off all power to the area. Emergency lights must be
turned
on. Cool closed containers with water spray. Use supplied
air-breathing
equipment for enclosed areas. Unusual fire and explosion hazards.
Liquid
is irritating to eyes. Empty product containers retain product
residue. Do
not weld, cut, or expose to flame or spark.
REACTIVITY DATA
- Stability: Stable
- Conditions to
Avoid: Extreme heat, open flames or sparks, depletion of
inhibitor and oxygen.
- Incompatibility
(Material to Avoid): Trimethylol propane is used in the
manufacture of the resin used in this product; therefore it should
not be
combined with phosphorus containing materials because toxic fumes
may be emitted in a fire situation.
- Avoid oxidizing
Materials: Acids, Bases, or Hydrogen Peroxide.
- Hazardous
Decomposition or By products: Acid smoke, oxides of carbon
and aldehydes.
Hazardous Polymerization: Will not Occur.
HEALTH HAZARD DATA
- Inhalation Health
Risks and Symptoms of Exposure:
- Anesthetic.
Excessive inhalation can cause irritation of the
respiratory tract.
- Skin and Eye
Contact Health Risks and Symptoms of Exposure:
- Skin: Moderate
irritation and drying.
- Eyes: Potential
redness and tearing
- Ingestion Health
Risks and Symptoms of Exposure: nausea
- Carcinogenicity:
- NTP -No,
- IARC Monographs -
No,
- OSHA Regulated -
No
- Emergency and
First Aid Procedures:
- Inhalation:
Remove to fresh air. Administer oxygen if breathing is
difficult. Restore breathing if necessary. Treat symptomatically.
Consult a physician.
- Skin:
physician if needed.
- Eyes: Flush
immediately with large amounts of water for at least 15
minutes. Take to a physician for medical treatment.
Ingestion: Drink 1 or 2 glasses of water to dilute. Do not induce
vomiting.
Get medical help.
PRECAUTIONS FOR SAFE HANDLING AND USE
- Steps to be taken
in Case Material is Released or Spilled:
- Remove all
sources of ignition (Flame, hot surfaces, and electrical static,
or frictional sparks). Avoid breathing vapors, ventilate area,
contain and
remove with inert absorbent and non-sparking tools.
- Waste Disposal
Method:
- Dispose of in
accordance with local state and federal regulations.
Incinerate in approved facility. Do not incinerate closed
containers.
- Precautions to be
Taken in Handling and Storage:
- Do not store
above 40 deg C. Store large quantities only in buildings
designed to comply with OSHA 1910-106. Keep closures tight and
container upright to prevent leakage. Do not store or use near
heat,
sparks or flame. Never use pressure to empty. Drum must not be
washed out or used for other purposes. Drums of this material
should be
grounded when pouring.
Other Precautions:
Do not get in eyes. Prevent prolonged or repeated breathing of
vapors or
spray mist. Avoid breathing of sanding dust. Wash skin thoroughly
with soap
and water after handling. Close container after each use. Do not
transfer this
product to unlabelled containers. Do not handle until the
manufacturer safety
precautions have been read and understood. Keep out of the reach
of children.
CONTROL MEASURES
- Respiratory
Protection if desired or in enclosed environments:
- Use a NIOSH-
approved respirator to prevent overexposure when in
enclosed spaces, when exposure exceeds occupational exposure
limits (Section II). Use either an atmosphere-supplying respirator
or
an air-purifying respirator for organic vapors in compliance with
29
CFT 1910-134, with provision for mist removal if conditions so
indicate.
Ventilation:
All application areas should be ventilated in accordance to OSHA
regulation 29 CFT 1910.107,1910.108. Protective Gloves:
Recommended.
Eye Protection: Safety eye wear including splashguards or side
shields
recommended.
Storage & Handling
Hazardous Goods: Paint, Flammable Liquid, UN1263 Class III Hazchem
3YE
Storage - Coatings must be stored and handled in compliance with
all
current local regulations applying to flammable liquids. Store in
cool, dry
protected storage, well ventilated, at between 5 - 40 deg C and
out of
direct sunlight, moisture or rain. Maintain unmixed material in
sealed
containers at all times.
DISCLAIMER
The information provided in this MSDS has been obtained from
sources
believed to be accurate and reliable. It is furnished without
warranty of any
kind, express or implied. Recipients should determine that the
information is
current and suitable for the protection of the environment and the
health and
safety of your employees and users of this product.
The above information is based on the data of which we are aware
and is
believed to be correct as of the date hereof. Since the
information contained
herein may be applied under conditions beyond our control and with
which we
may be unfamiliar and since data made available subsequent to the
date
hereof may suggest modification of the information, we do not
assume any
responsibility for the results of its use. This information is
furnished upon
condition that the person receiving it shall make his own
determination of the
suitability of the material for his particular purpose.
This Material Safety Data Sheet (MSDS) contains environmental,
health and
toxicology information for your employees. Please make sure this
information
is given to them. It also contains information to help you meet
community
Right To Know emergency response reporting requirements under SARA
TITLE
III and many other laws. If you resell this product, this MSDS
must be given
to the buyer or the information incorporated in your MSDS.