Economic Alarm System 9 Zone Alarm System
main host ( one set)+ door magnet detector ( one pc )+ remote controller ( two pcs )+ phone line ( one line )+ UPS adaptor ( one pc )+ siren ( one pc )+ PIR detector ( one pc )
main host ( one set)+ door magnet detector ( one pc )+ remote controller ( two pcs )+ phone line ( one line )+ UPS adaptor ( one pc )+ siren ( one pc )+ PIR detector ( one pc )
Basic functions of Economic Alarm System 9 Zone Alarm System:
1) Telephone Alarm: 4 lines telephone auto-dialing alarm,
which can notify host’s Mobile phone and other fixed phone.
2) Wireless Connection: wireless connection between main
host and detectors, easy to enlarge
3) Cut-off Alarm: Alarm will start up the siren when the line was cut off.
4) System set up was available by password
5) Extension alarm-) Can send out the alarm signal by the extension telephone
6) Long-range control: Can control main host by telephone
7) Long-range monitor: can monitor spot by telephone
8) Emergency Alarm: The remote controller has a button for emergency alarm 9) Power-off protection: All input data will not be affected when power is off
10) Alarm priority: Whatever the line is busy or not, main host can
which can notify host’s Mobile phone and other fixed phone.
2) Wireless Connection: wireless connection between main
host and detectors, easy to enlarge
3) Cut-off Alarm: Alarm will start up the siren when the line was cut off.
4) System set up was available by password
5) Extension alarm-) Can send out the alarm signal by the extension telephone
6) Long-range control: Can control main host by telephone
7) Long-range monitor: can monitor spot by telephone
8) Emergency Alarm: The remote controller has a button for emergency alarm 9) Power-off protection: All input data will not be affected when power is off
10) Alarm priority: Whatever the line is busy or not, main host can
auto-dial for alarm when there are something emergency.
11) Delay time and set up defenses -) Can delay time and enter
working state in some time after the host computer opens
12) Separate arm-) can set up a part zone effectually by remote controller
such as night being invalid in the room, the windows and doors are effective
11) Delay time and set up defenses -) Can delay time and enter
working state in some time after the host computer opens
12) Separate arm-) can set up a part zone effectually by remote controller
such as night being invalid in the room, the windows and doors are effective
Features:
1- Voice alarm-) can record 10 seconds voice in advance.
Will alarm automatically when the telephone give an alarm.
2- Distinguish alarm-) Users can distinguish from the warning
type according to times of " tick " in the telephone
3- Network alarm-) The warning information of this host can be
passed to the computer of networks the centre through the telephone wire
4- LED display function: Arm, Disarm, Power, Alarm, and Low power
Will alarm automatically when the telephone give an alarm.
2- Distinguish alarm-) Users can distinguish from the warning
type according to times of " tick " in the telephone
3- Network alarm-) The warning information of this host can be
passed to the computer of networks the centre through the telephone wire
4- LED display function: Arm, Disarm, Power, Alarm, and Low power
Specifications:
Power voltage: AC110-242V DC9-15V
Static current: ≤50mA
Alarm current: ≤250mA
Receive Frequency: 433MHz±1MHz
Substitute Battery: 6* 7#
Alarm Sonority: >110db within 1M
Way of Dial: dual-frequency dial
Dial parameter: -7±2dBM(High-Frequency)
-9±2dBM(Low-Frequency)
Work tempreture:-10℃~50℃
Work humidity: <80%
Dimension of main host: 120×115×60mm
◆Wireless passive infrared sensor: LW-618-3S
Supply battery: 3*1.5V*5#
Static current: ≤30uA
Alarm current: ≤7mA
Launch frequency: 433MHz±1MHz
Launch distance: ≥500 meters (open area)
Work model:
(1.)Test mode (open cover and K1 start, the min time is 10
seconds between twice alarms)
(2.)Work mode (close cover and K1 press, the min time is 60
seconds between two alarms)
K1 is the touch switch to connect the main host
Detection angle: horizontal ≥110° (vertical ≤90°)
Detection distance: 8-12 meters
Test time: 60 seconds
Low power alarm: When the power≤3.9V,
the sensor will send signal to the
host for low battery alarm, then the LED will flash twice every 3
seconds, after that the sensor will not work at longer if you do not
replace new battery
Wireless door gap detector:ZX-808-2AV
Power: DC12V
Battery capacity: 65mA
Work distance: 1.5cM
Static Current: ≤1.5uA
Alarm Current: ≤10mA
Launch Frequency: 433MHz±1MHz
Transmission distance: ≤300meters(open area)
Wireless remote controller: ZX-858-2AV
Power voltage: DC12V
Battery capability: 65mA
Static current: 0
Alarm current: ≤6mA (can used twenty –thirty thousand times)
Launch frequency: 433MHz±1MHz
Coding way: Fastness coding
Key-press explain : (1arm, 2arm, disarm ,urgency hope)4 key
Transmit distance: ≤300 meters(beeline distance
host for low battery alarm, then the LED will flash twice every 3
seconds, after that the sensor will not work at longer if you do not
replace new battery
Wireless door gap detector:ZX-808-2AV
Power: DC12V
Battery capacity: 65mA
Work distance: 1.5cM
Static Current: ≤1.5uA
Alarm Current: ≤10mA
Launch Frequency: 433MHz±1MHz
Transmission distance: ≤300meters(open area)
Wireless remote controller: ZX-858-2AV
Power voltage: DC12V
Battery capability: 65mA
Static current: 0
Alarm current: ≤6mA (can used twenty –thirty thousand times)
Launch frequency: 433MHz±1MHz
Coding way: Fastness coding
Key-press explain : (1arm, 2arm, disarm ,urgency hope)4 key
Transmit distance: ≤300 meters(beeline distance