Product Main

Specifications

KEY FEATURES :
  1. Equipped with high-performance IR LEDs

    E-KAM Infrared IP Camera EK120 Series is equipped with high-performance IR LEDs that can detect and visualize even the small movement of subjects in total darkness without any light. It can be trusted to deliver the most reliable video surveillance by providing you with vivid color video images during the day and high-resolution black and white images during the night.

  2. Support ICR True Day & Night function

    E-KAM Infrared IP Camera EK120 Series provides you with the ICR True Day & Night feature. It automatically removes the IR filters when night falls and switches to B/W mode to provide high image resolution during the night.

  3. Support IP65's Waterproof & Dustproof function & Sun Shield function--allowed to be installed outside of the door.
  4. Support DDNS Server and Assistant Connection Server,the device can be accessed accurately and easily over WAN, though the device uses a dynamic IP address.
  5. Support Working Throught NAT Devices, allowed to be accessed easily by using an Assistant Connection Address without setting up router.
  6. Support being identified automaticlly by management software in local area network.
  7. Support different decoded image streams to save the system and network resources.
  8. Support adaptive rate control function.
  9. Support being decoded over WAN by using an EK500 Series Decoder, the decoded image will be output to a TV set or monitor in turn. Dwell time of an image can be adjusted.
  10. Support web server function, allowed to be accessed expediently via Internet Explorer.
  11. Built-in embedded Linux operation system, support downloading the software, upgrading and setting the device.
  12. Support fault detection, recovery and automatic connection.
  13. Multi-protocols support: TCP,UDP,HTTP,PPPoE,DHCP,DNS,AGMP,TFTP.
  14. Equipped with Sony progressive scan CCDs and advanced DSP technology – provides clear and detailed images while maintaining high sensitivity.
  15. Variety of power options: DC 12 V, or PoE (Power over Ethernet).
  16. Choice of compression formats: advanced MPEG4-ASP. MPEG4-SP
  17. Limits data bit rate while maintaining high-quality images, Ideal when network bandwidth is limited, Useful for calculating the required bandwidth during installation
  18. Alarm function – with activity detection and pre-/post-alarm recording modes.
  19. Bi-directional audio function.

SPECIFICATION :

Camera

Image Pick-up Device: Refer to the ORDER INFORMATION
Total Pixels: 811(H) x 508(V)
Effective pixels: 768(H) x 494(V) OR 510(H) x 492(V)
Scanning System: 2:1 Interlace 525Lines / 60 Fields / 30 Frames
Synchronization: Internal / Line Lock selectable
Scanning Frequency: Horizontal: 15734 KHz / Vertical: 59.94 Hz
Horizontal Resolution: Color: 420TVL OR 480TVL, Refer to the ORDER INFORMATIONS
S/N Ratio (Y signal): 50dB (AGC off, Weight on)
Min. Illumination: 0 Lux
Gain Control: Auto
White Balance: ATW / AWC / Manual selectable (1800°K~10500°K)
Electronic Shutter Speed: Auto / Manual selectable (1/60~1/120000sec)
Motion detection: MD1 / MD2 / Off selectable (Built-in alarm output connector)
Lens Mount: C / CS mount (Easy or focus type)

Image

Compression format : MPEG4-SP / MPEG-4-ASP
Maximum frame rate: MPEG4 : 30 fps (NTSC), 25 fps(PAL)
Digital image resolution: D1(PAL: 720 x 576 \ NTSC: 720 x 480), CIF(352 x 288)
Image encoded bandwidth: 64kbps~4Mbps
Bit rate adjustment: Variable Bit Rate (VBR) or Constant Bit Rate (CBR)
Image parameter adjustment: Quality, Contrast, Brightness, Hue and Saturation
Caption Overlay: Support date and time texts overlay on image and the positions of the texts can be adjusted.

Audio

Audio compression: ADPCM
Audio encoded bandwidth: 32kbps
Built-in mini microphone

Network

Ethernet type: 10/100 Base-TX
Protocols: TCP、UDP、HTTP、PPPoE、DHCP、DNS、AGMP、TFTP
Number of clients: MPEG-4: 10

Interface

Ethernet: 10Base-T/100Base-TX (RJ-45)
I/O port: 5 GPIO connectors for Input or Output
Communication connector: 1 RS-232 selectable
External microphone input: Mini-jack (monaural, 2.2 K2.5 V plug-in power)
Audio line output: Mini-jack (monaural), max output level: 1 Vrms

General

Mass: approx. 350 g (1 lb 2 oz)
Dimensions (W x H x D): 62 x 51 x 120 mm
Power requirements: DC 12 V / PoE (DC48V selectable)
Power consumption: 15 W max. and 4 W min.
Operating temperature: -10 to 60°(14° to 140°)
Storage temperature: -10 to 60° (14° to 140°)
Relative humidity: 10%~90%

System Requirements

Operating system: Microsoft Windows 2000/XP
Processor: CPU: Intel Pentium IV 1.5 GHz or higher
Memory: RAM: 256 MB or more
Web browser: Microsoft Internet Explorer Ver.5.5 or higher