Product Name: GM Tech-2 PRO Kit (CANDI & TIS)
Part No.: PD019
Net Weight: 15KG
Description:
GM TECH2 PRO Kit interface and CF card is original. Cables and Adapters is copy. The same as original.Update by internet.
The Tech-2 full set is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
· Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
· Support for on-board diagnostics on all GM systems 1992 thru current year.
· Removable hardware modules provide insurance against scan tool obsolescence.
· Large, easy-to-read backlit screen.
· RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
· Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
· Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech 2 Specifications
|
Dimensions |
12″×6″×2″ |
|
Microprocessor |
32 bit, 16 MHz |
|
Memory |
32 MB flash type II PCMCIA. Type III slot available for future expansion. |
|
Communications |
Integral RS232 communication port. |
|
Screen |
3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once |
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
· Tech-2 Flash Tester
· 32 MB PCMCIA Card with GM OE Applications
· CAN diagnostic interface module(CANdi)
· GM aftermarket Expertec TIS software on DVD-ROM disks
· TIS2000 dongle to access SPS/Security features
· Data/Sensor/Trouble Code Manual
· DLC Cable, DLC Loopback Adapter
· 12V Cigarette Lighter Power Cable
· SAE 16/19 Adapter
· NAO 12/19 Adapter
· Battery Power Cable
· Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
|
· ’05 Buick Allure (3.6L)
· ’05 Buick LaCrosse (3.6L)
· ’05 Buick Rainier (5.3L)
· ’04-’05 Buick Rendezvous (3.6L)
· ’04-’05 Cadillac CTS (3.6L)
· ’04-’05 Cadillac SRX (3.6L / 4.6L)
· ’04-’05 Cadillac XLR (4.6L)
· ’05 Cadillac STS (3.6L / 4.6L)
· ’05 Chevrolet Cobalt (2.2L)
· ’05 Chevrolet Corvette (6.0L) |
· ’05 Chevrolet Equinox (3.4L)
· ’05 Chevrolet TrailBlazer (5.3L)
· ’05 Chevrolet SSR (6.0L)
· ’04 Chevrolet Malibu (Body/Chassis only)
· ’05 Chevrolet Malibu (3.5L)
· ’05 GMC Envoy (5.3L)
· ’05 Pontiac G6 (3.5L)
· ’05 Pontiac GTO (6.0L)
· ’05 Pontiac Pursuit (2.2L)
· ’03-’05 Saturn ION (2.2L) |