2D/3D crystal Laser engraving machine TJDP-521K
A.Laser diode pump with 1000Hz air-cooling system
B.3-4mins for a 3d portrait inside the 50x50x80mm crystal
C. Used freindly software and mobile use(700x450x600mm ,weight82kgs)
D. Engraving range 100x100x80mm.or 70x70x80mms
E. Lowest power consumption, low lifetime cost, low cost of ownership
F. Used friendly software under Windows Xp require only short training
G. Simple service through exchange of only one functional unit in a short time
Descripion
TJDP-521K galvo scanner laser engraving machine is the latest model of our productions from TianJun (Wuhan) Laser Co., Ltd. This system was specially designed for mobile use and for installation in laser shops.Go to where your customers are with the TJ DP-521K this doesn't present any problem - plug it in and off you go.The system is extremely compact and very easy to set up. It is easy to control from a computer comes with it.Setting up the system on site is child's play -it really is a portable laser system.In terms of performance the small TJ DP-521K is in no way inferior to its bigger brothers even with this compact internal engraving system you can achieve an excellent dot density with a top processing speed.
Work principle
Frist, take a 3D photo of one or more persons with the most advanced camera and then process them in computer to form 3D portraits. Second, this model adopts the advanced diode-pumped laser subsurface engraving technique to engrave glittering and translucent 3D portraits. These individual portrait arts and crafts are adequate for all kinds of shops, shopping mall and tourismspots.
|
Item |
Parameter |
|
Laser Medium |
Diode-pumped Nd: YAG |
|
Laser Frequency |
1000Hz |
|
Maximum Engraving Speed |
60000dots/min |
|
Maximum Engraving Range |
70x70×80 mm (F-theta len 100mm)
100×100×80mm (F-theta len 160mm) |
|
Laser Wavelength |
532nm |
|
Maximum Power of the Whole Machine |
1KW |
|
Number of Laser Heads |
1 |
|
Cooling way |
Air cooling |
|
Spare Part |
None |
| Continuous Working Time |
12 hrs |
| Electrical Connection |
AC220v±10%,50-60hz |
|
Weight of the Whole Machine |
82kgs |
|
Dimension of the Whole Machine |
700X450X600mm |
|
Room temperature |
15-35 |
|
Engraving time |
50X50X80mm 3mins |
|
30X20X20mm 40s |