I. Mode of connection Connecting the wire Connect the wire to press terminal with M5 drilling hole.(It may be Connect to the press terminal of 22mm) Connecting with the capacitor Correctly fix the capacitor with the strong torque of 35～40kgf.cm. Cover II. Scope of Application The product complies with IEC30-1998 standard. Place for installation:Indoor. Ambient temperature:-40℃～+45℃. Capacity error:-5%～+10%. Withstand voltage:Withstanding 700VAC for 2～5s between terminals and 3000VAC for 10s between the whole terninals and the outer casing Loss. rate:below 0.12%. Allowable overvoltage: Below the rated voltage of 110%(Within 8 hours every 24 hours). Below the rated voltage of 115%(Within 8 minutes every 24 hours). Below the rated voltage of 120%(Within 5 minutes and less than two time evert month). Below the rated voltage of 130%(Within 1 minutes and less than two time evert month). Allowable overcuttent:Below the rated voltage of 130%. Insulating impedance:All terminals and the outer casing are above 300MΩ(500VDC) for one minute. Internal discharge resistance:The internal protector reduces the voltage to below 75V in three minu