BODY FILLER
STUCK A-PLUS
PRODUCT Two component polyester putty to fill big dents and surface irregularities of car body
PROPERTIES
Putty Of A-PLUS , Filling Paste, Easy To Apply,Elastic And Easy To Sand.
Suitable substrates & Surface preparation:
Steel surface - Old paint surfaces- Treated pampers with its primer- primed surfaces
|
Mixing ratio (by weight):
100 parts (by weight) of putty
2-3 parts (by weight) of hardener |
Recommended sand paper Grades:
For Dry Coarse Sand P80 - P120 ,Fine Sand P180 - P240
For Wet Coarse Sand P80 – 120, Fine Sand P 180-P320
|
|
Pot life:
4-5 minutes at 20°C When mixed |
Color:
Grey - Red - White – Yellow
|
|
Drying times:
Dry to flat 20°C. 20 min 40°C. 10 min |
Shelf life:
Putty 1 year (at 20°C)
Hardener 1 Year (at 20°C) |
|
Recoatable with:
All paint types
|
Cleaning of equipment:
Nitrocellulose thinner IS suitable |
|
Packaging:
As customer need |
Shrinking
Do not shirink |
Material safety data:
When using these products its required to comply with the national regulation for health and safety The data on the label of the product must be considered Storage and transportation should be comply with the local laws, The information given in this data sheet is based upon our best knowledge and experience with application conditions set to A-Plus laboratory.