BD30AV Series Digital Audio Video Delay Line BD30AV is the highest quality solid state audio & video delay line without data compression. The delay time could be set up to 60 seconds in increments of 1 frame steps. Audio and video can be delayed together or separately in different amounts. The independent audio offset can be eliminate the lip Sync problem. BD30AV series could be easily used in the On-Air TV broadcasting. The frame by frame adjustable feature is used in most of the Virtual Sets. Built-in 10Bits time base corrector and frame synchronizer, BD30AV series audio video delay line allows to feed the unit with any embedded, de-embedded, digital or analog signals providing always perfect levels and GenLock to its outputs. Performing full 10-bit signal process and 32-bit internal DSP processing, BD30AV offers exceptional DTV-Grade picture quality with excellent AGC and CGC functionalities and top quality color correction. Both digital embedded signal, digital SDI video, analog composite or component video and digital AES/EBU, analog balance XLR audio I/O are available on one unit depend on the different customers' requirements. Features ?Supports digital Embedded and De-Embedded signal I/O. ?Supports all of the digital, analog video and audio signals input and output ?Maximum delay time up to 60 seconds. Frame by frame adjustable. ?Built-in 10-Bit high performance frame Sync/TBC. ?Gen lockable ?Excellent AGC/CGC ?Audio offsets independence ?Audio Mute function ?Bypass mode enabled ?Provides RS-232 as the external remote interface or stand alone 1-U rack mountable external control unit. (Optional) Video Specification (Tested By Tektronix VM700) Sample Precision 10 Bits Composite / SDI Sample Frequency 27MHz CCIR656 Bandwidth 6MHz Differential Phase < 1 degree Differential Gain < 1% K Factor (2T Pulse) < 1% Chroma Delay < 5 ns Signal to Noise Ratio > 70 dB (Weighted) Serial Digital SDI 75 Ohm (BNC), Auto EQ to 300M (With Reclocked & Buffered BNC Output) SDI Amplitude 800 mv ?25 mv SDI Jitter (1 kHz) < 350 ps SDI Jitter (10 Hz) < 500 ps Audio Specification Sample Precision 24Bits Sample Frequency 48kHz Sample Frequency 20Hz - 20kHz Signal to Noise Ratio > 90 dB THD+N 0.03% (+4dbU) Channel Isolation 70db Max Input +20dBU Mechanical specification Chassis Dimension 44.5mm ?450mm x 480mm Chassis Weight 6 Kg Electrical specification Power 220V/50Hz Power Consumption 60W For our product continue to be progress, B&M will have right to change BD30AV series products' specifications without notice.