Longitude latitude mesh is also called metal wire mesh, the automatic longitude latitude mesh machine form type one time,operation is easy, the speed can up to 60-100m per hour, and the ability is stable, the surface of the panel is smooth.It is very suitable for the middle and big coal mine,it can be use as the shoring of the mine and the false roof of the mine. It can economize plumbum,and the safe index can up to the national standard. The woof is one line, and the mesh is not easy to undrawn. Ours is the only one factory that produce this machine, and it has been the new technical that stress spreed in the mine coal and mine industry.

Main technical parameters

1.Wire scope of weaving: 1.5-4mm  Mesh scope of weaving: 20-650mm  With 20 sets of wire bobbin at buyer's requirements

2.The machine is controlled by PLC automatic controller, so only one person is needed to operate it

3.The output per minute: for example: If the mesh is 50x50mm, width: 2m, the output will be: 1M2 min.

4.Suitable wire to the machine: the tensile scope of the wire 300-500N/ M 2

5.Use compacting machine to make it into rolls

6.Total power of equipment: 5kw

7.Weight of equipment: 1600kg

8.Outside size: main machine: 3600mmx2700mmx1700mm