Product Main

Specifications

Features:
  • IEEE802.3, IEEE802.3U standard
  • Meets RFC2544 requirement, Including packet loss rate testing, through output testing and packet transmission latency measurement by using different packet length, burst/constant transmission mode and auto-inserting packet serial number
  • Pre-defined testing packet pattern, as well as options for user own packet pattern
  • Performance tests up to maximum net load (100Mbps)
  • Checking networks safety by sending error packets
  • IEEE802.1Q VLAN support
  • Real time network monitoring
  • Layer 3 loop back operation
  • Ping and Route Trace support
 
Main Specifications:

Name

Description

Interface

10/100 Base-T

Connector

RJ45

Management Interface

RS232 or 10/100 Base-T

PHY operation

Auto negotiation, 10/100Mbps and Full/Half Duplex

Packet pattern

Ping Echo, UDP Echo, or user defined pattern

Data payload pattern

All 0, All 1, Inc. Dec or Random

Packet serial number

Enable

Network delay testing

Round trip delay

Destination MAC address

User defined or automatically get from ARP

Burst mode

Enable

Transmission rate

30kbps to 99.99Mbps

Traffic simulation

Up to 6 source MAC address and 6 destination MAC address

Packet capturing

From 5000 to 10000, depending on packet length

Capturing mode

Unicast and/or broadcase/ multicase packet.

Built in Battery

Rechargeable

Power adaptor

AC/DC, Input: AC 110V – 240V, Output: DC 5V

Operation hour

5 hours with a full charged battery

User interface

Chinese, English

Dimensions (W x L x D)

8.8 x 18.2 x 4.2 cm

Weight

650 g

Operating Temperature

-5 – 60 oC