| boiler model | LHS0.2-1.0-Y(Q) | WNS0.5-0.7-Y(Q) | WNS1.0-0.7-Y(Q) | WNS2-1.25-Y(Q) | WNS4-1.25-Y(Q) | WNS6-1.25-Y(Q) | WNS8-1.25-Y(Q) | WNS10-1.25-Y(Q) | SZL20-1.25-Y(Q) | SZL35-1.25-Y(Q) | |
| nominal evaporation kg/h | 200 | 500 | 1000 | 2000 | 4000 | 6000 | 8000 | 10000 | 20000 | 35000 | |
| nominal working pressure Mpa | 1 | 0.7 | 0.7 | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 | |
| nominal steam temperature | 183.2 | 169 | 169 | 194 | 194 | 194 | 194 | 194 | 194 | 194 | |
| design efficiency | 88 | 89 | 89 | 89 | 89 | 89 | 89 | 89 | 89 | 89 | |
| fuel consumption | light oil kg/h | 14 | 37 | 72 | 150 | 285 | 425 | 535 | 668 | 1336 | 2338 |
| heavy oil kg/h | 38 | 76 | 156 | 304 | 455 | 570 | 712 | 1424 | 2492 | ||
| city gas Nm3/h | 31 | 88 | 170 | 357 | 675 | 1006 | 1266 | 1582 | 1364 | 5537 | |
| natural gasNm3/h | 44 | 85 | 178 | 338 | 503 | 633 | 791 | 1582 | 2769 | ||
| main steam valve seat mm | DN40 | DN40 | DN50 | DN80 | DN100 | DN100 | DN125 | DN200 | DN200 | DN250 | |
| feed water tube diameter mm | ZG1 | DN25 | DN25 | DN25 | DN40 | DN50 | DN50 | DN50 | DN65 | DN80 | |
| blowdown tube diameter mm | DN25 | DN25 | DN25 | DN40 | DN50 | DN50 | DN50 | DN50 | DN50 | DN50 | |
| safety valve tube diametemmr | ZG11/2 | 1-DN40 | 1-DN40 | 2-DN40 | 2-DN50 | 2-DN80 | 2-DN80 | 2-DN80 | 2-DN100 | 2-DN150 | |
| chimney diameter mm | 150 | 300 | 350 | 350 | 500 | 600 | 700 | 800 | 1450 | 1880 | |
| max installed size | length mm | 1380 | 2100 | 2800 | 3700 | 4000 | 4800 | 5500 | 6900 | 5700 | 6200 |
| width mm | 1180 | 1200 | 1600 | 2000 | 2700 | 2800 | 3200 | 3500 | 3500 | 4000 | |
| height mm | 2180 | 1500 | 1900 | 2100 | 2600 | 2800 | 3800 | 4300 | 4700 | 5300 | |
1. Because high temperature smoke and fire can be revolved strongly and back, the fuel can be burned out in low oxygen, so it is better be used in the plateau area.
2. High-temperature heating surface is below the central line of shell. Because there are a large scope of the water safety level. Boiler can be run safety.
3. Heating surface is reasonable, and the degree of automation is high. Compared with other boilers, it is small in the volume and area, also easier to be installed.
4. High efficiency. The fuel is fired suspended in big furnace, the back pressure of the boiler is small, the path of smoke is long.
5. it is good to the environment protection. Because there are 2 reheat cycle in the furnace, the fuel can be burned enough, also the smoke dust is little. This boiler is the production of green environment.
6. Reliable quality. Each KINGLLI boiler is inspected by Province Inspect Institute, then got the qualified certificate.
7. Because of automated control, KINGLLI boiler can be operated conveniently.
8. Maintain conveniently. It is easier to be fixed and maintained with swift open structure of front and back smoke box.
Boiler model: WNS3-1.25-Y(Q)
Nominal evaporation: 3tph
Nominal working pressure: 1.25Mpa
Nominal steam temperature: 194C
Design efficiency: 89%
Fuel consumption
Light oil: 210kg/h
Heavy oil: 223kg/h
City gas: 496Nm3/h
Natural gas: 248Nm3/h
Main steam valve seat: DN80
Feed water tube diameter: DN40
Blowdown tube diameter: DN40
Safety valve tube diameter: 2-DN40
Chimney diameter: 450mm
Max installation size
Length: 3900mm
Width: 2000mm
Height: 2100mm

