The main characteristics of hot lamination film: A: It doesn't include solent adhesive, wich can protect the printing color from changing. B: The adhesive effect is superior finish&gloss, which is much better than that with the solvent adhesive. C: It can also be used on the traditional lamination machine. And it would not cause tunneling and swellings. D: Time saving, no need to prepare the glue beforehand. Note: If need two side eletricity-giddy film, please narrate to order. Directions of using the hot lamination film: A. It can be used for lamination in a temperature range of 90 degree~105degree, and the final result will vary with different papers and machine. B: About 70%of the max adhesive strength can be achieved at once and the max-adhesive strengeth can be reached a week later. C: If creasing is needed, it is advisable to experiment with a few so as to ensure the effects. D: The max-adhesive strength should be decided before using, and the effects will vary with different printing oil. E: We suggest the users wait for the complete dryness of the oil in order to avoid delaminating. F: Because the film become adhesive in low temperatures. It is not advisable to place it in a high temperature or place it horizontally.