|
Model No. |
+3.3V |
+5V |
-5V |
+12V1 |
+12V2 |
-12V |
+5VSB |
Remarks |
|
MD-ATX400P4 |
25A |
28A |
0.5A |
14A |
|
0.8A |
3A |
400W |
|
* Edition: ATX 2.03 |
|
|
* Universal AC input/Full range | |
|
* High efficiency, low noise & ripple | |
|
* 100%ATE and Hi-pot test | |
|
* 7 output sockets (5 large and 2 small) | |
|
* Built-in 12mm Silent fan | |
|
* 100% full load aging (50℃) | |
|
* Adding special 4PIN 12V and 20+4PIN sockets | |
|
* Protections: short circle, overload, over voltage |
Specification:
· Temperature range：Working Temp.:0℃-50℃; Storage Temp.: 20℃+80℃
· Relevant Temperature Modulus: 0.01%/℃
· Instant Circuit Response: Output voltage is lower than 1ms response
· Relevant Temperature Modulus: 0.01%/℃
· Instant Circuit Response: Output voltage is lower than 1ms response
time, Max. 25% of load variations
· Hold up time：16ms at full load and normal voltage
· Withstand voltage: I/P—FG：1500VAC， 60 second
· Humidity：5--95%RH
· Efficiency：Commonly 70%, Min. 65% at full load
· Overload protection: Max. 150%
· Inrush current：Max. 30A at 115VAC，Max. 50A at 230VAC cold start at 25℃
· Humidity：5--95%RH
· Efficiency：Commonly 70%, Min. 65% at full load
· Overload protection: Max. 150%
· Inrush current：Max. 30A at 115VAC，Max. 50A at 230VAC cold start at 25℃
· Over voltage protection：Sense lever: +3.3V/+5V/+12V; Max.voltage: 4V/6V/13.2V
Characteristic：
· Voltage：90-132VAC/160-265VAC
· Frequency：50/60HZ
· Input current：6.0A{RMS}/115VAC,3.0A{RMS}/230VAC
? Safety standards:UL,FCC,3C,CB,CE
· Frequency：50/60HZ
· Input current：6.0A{RMS}/115VAC,3.0A{RMS}/230VAC
? Safety standards:UL,FCC,3C,CB,CE