Compatible Sizings and Applications.
Chopped Strand Mats are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, automotive parts, bathroom equipment and cooling towers.
Chopped Strand Mats are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, automotive parts, bathroom equipment and cooling towers.
Product Features.
Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
Uniform binder distribution ensures good mat integrity, little loose fibers and small roll diameter.
Excellent flexibility ensures good mold ability with no spring back at sharp angles.
Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost and enhances productivity and mechanical properties of the end products.
The composite products have high dry and wet tensile strength and good transparency.
Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
Uniform binder distribution ensures good mat integrity, little loose fibers and small roll diameter.
Excellent flexibility ensures good mold ability with no spring back at sharp angles.
Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost and enhances productivity and mechanical properties of the end products.
The composite products have high dry and wet tensile strength and good transparency.
General Data.
Binding Type: Powder or Emulsion;
Density: 80-900g/㎡;
Width: Max.2600mm,Min.200mm
Edge: 1 or 2 untrimmed edge available upon request.
Binding Type: Powder or Emulsion;
Density: 80-900g/㎡;
Width: Max.2600mm,Min.200mm
Edge: 1 or 2 untrimmed edge available upon request.
Package
Each roll Chopped Strand Mat is would onto a paper tube, The mat roll is wrapped up with plastic bag, and then packed in a cardboard box or wrapped up with Kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a container directly or on pallets.
Each roll Chopped Strand Mat is would onto a paper tube, The mat roll is wrapped up with plastic bag, and then packed in a cardboard box or wrapped up with Kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a container directly or on pallets.
Storage
Chopped Strand Mat should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15℃-30℃ and relative humidity between 40%-70%.
Chopped Strand Mat should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15℃-30℃ and relative humidity between 40%-70%.