The VGA2410 development board has a modular design splitted into a four layer Core Board and a two layer Application Board. The SAMSUNG S3C2410A micro controller is located on the core board together with SDRAM, NAND Flash Audio and 10MBit Ethernet. It is very easy for the users to develop their own products by simply tailoring the Application Board. Due to the maturation and high reliability of CPU and thousands of times proved stability of the Core and Application board, this is the ideal choice for user input output controller or Terminal controller.
VGA2410 at a glance
Processor:
SAMSUNG S3C2410A up to 200MHz
Memory:
SDRAM:64MB
NAND Flash: 64MB, (K9F1208, can be replaced by other types of 16M, 32M, or 128M)
Network interface:
One 10M network interface, CS8900CQ3 chip, with Link and Receiving indicators
USB interfaces:
2 x USB1.1
Audio:
The I2S interface chip UDA1341 supports
one stereo audio output interface,
one MIC interface
Storage interface:
One SD card interface
One IDE interface, PATA/EIDE hard disks or CD
Touch screen interface:
4-wire resistance touch screen interface
Video output:
One VGA interface, through which the VGA comp. display can be connected directly
One TV interface, through which TVs following the PAL or NTSC specification can be connected directly
One LCD Connector
PS2 interface:
One PS2 keyboard interface
JTAG:
One 20pin standard Multi-Ice JTAG interface
Misc. interfaces :
One 40pin connector works as expansion port, draws out the IIC BUS, SPI BUS, the five AD outputs, the unused GPIO ports and the external interrupts lines.
One 20pin connector draws out all the address lines and control lines needed to emulate a standard IDE/ATAPI/PATA port.
Power interface:
5V power supply, with switch and status lights
Enclosure list:
One VGA2410 core board
One VGA2410 application board
One WIGGLER JTAG board(with one 50cm 20pin cable)
One 5V power source (not for all countries available, please ask us)
One serial port extension line
One ethernet cable(cross-over or direct connected)
One CD, which contains all necessary BSPs, English manuals, schematics, datasheets
For more products information, please visit our homepage: developmentboard.net
VGA2410 at a glance
Processor:
SAMSUNG S3C2410A up to 200MHz
Memory:
SDRAM:64MB
NAND Flash: 64MB, (K9F1208, can be replaced by other types of 16M, 32M, or 128M)
Network interface:
One 10M network interface, CS8900CQ3 chip, with Link and Receiving indicators
USB interfaces:
2 x USB1.1
Audio:
The I2S interface chip UDA1341 supports
one stereo audio output interface,
one MIC interface
Storage interface:
One SD card interface
One IDE interface, PATA/EIDE hard disks or CD
Touch screen interface:
4-wire resistance touch screen interface
Video output:
One VGA interface, through which the VGA comp. display can be connected directly
One TV interface, through which TVs following the PAL or NTSC specification can be connected directly
One LCD Connector
PS2 interface:
One PS2 keyboard interface
JTAG:
One 20pin standard Multi-Ice JTAG interface
Misc. interfaces :
One 40pin connector works as expansion port, draws out the IIC BUS, SPI BUS, the five AD outputs, the unused GPIO ports and the external interrupts lines.
One 20pin connector draws out all the address lines and control lines needed to emulate a standard IDE/ATAPI/PATA port.
Power interface:
5V power supply, with switch and status lights
Enclosure list:
One VGA2410 core board
One VGA2410 application board
One WIGGLER JTAG board(with one 50cm 20pin cable)
One 5V power source (not for all countries available, please ask us)
One serial port extension line
One ethernet cable(cross-over or direct connected)
One CD, which contains all necessary BSPs, English manuals, schematics, datasheets
For more products information, please visit our homepage: developmentboard.net