AFG Series Automatic Folder Gluer Machine
Automatic Flexo Printer Slotter and In-Line Folder Gluer is used to form boxes after the corrugated board is slotted, so that manual gluing and folding are not needed. The machine consists of a gluing unit, auto mastic laminating unit and counter ejector unit. After leaving the slotting unit, the gluing unit will supply glue to the corrugated board flap, and the laminating unit folds the board and laminates it . The edge pressing roller then presses the edges and the steel roller pre-presses it, then after folding, the corrugated boards are reshaped by a shaping board (patting the fronts and back of the boards). Following this, the counter ejector sends out the pile of cardboard and counts the quantity, then binds the pile of cardboard. The gluing, laminating and counter ejector workflow can improve work efficiency and increase the benefits of manufacturers through precise shaping after folding and precise operation of the counter and ejector unit.
Specification parameter form：

Automatic kicking feeder
1.PLC control of the main motors in the paper feeder, user-friendly interface and LCD display screen makes operation easy.
2. Front paper block, side positioners and rear block are all electronically controlled. Blower system features extra blower to add air volume if needed.
3. Additional sheet-in brush dust cleaner.
4. Double sheet-in roller structure.
Printing unit:
1.Printing Rollers of Printing unit can be rotated a full 360°when paper is in motion or stopped.
2. Printing Rollers can be electrically adjusted up axially to 12.5mm.
3. Printing unit has an automatic zeroing feature so that it resets automatically when not in operation.
4. Ceramic Anllox roller is produced in TaiWan and can be ordered from 200 to 350 Lines. This unit features a pneumatic down-pressure touch-board.
5. Chambered doctoring knife and ceramic rollers can be specified for the ink supply system.

Slotting unit:
1.Can be electronically rotated up to 360°,and features a depth gauge which directly displays the adjustment of the cutting knives.
2. Upper and lower synchro-running creasing unit and shaft, five sets for each group. Special distance displays and safety distance control device for slotting system.
3. Automatic setting of slotting knives with order register.
Upper gluing unit:
1.Motorized upper gluing unit and human-interface input controls.
2. Gluing roller works at the same speed as the main machine. When the machine stops, the gluing roller runs by itself so that the glue on the roller will not dry
Folding unit:
1.Motorized movement of folding beam, controlled by interface.
2. Front and back transmission shafts are located on top of folding beam to save space.
3. Adjustable folding pole to adjust to different corrugated boards.
4. Springy upper belt pressure roller avoids loss of hardness in corrugated cartons.
5. Lower synchrony-belt allows corrugated boards to go in smoothly, Corrugated carton guiding square and side roller.

Auto Stacker:
1.Air blower blows the boards down, while front patting boards make the front and back flat and neat.
2. Motorized adjustment of left and right side of stacker so that corrugated cartons are piled in the middle.
3. Motorized movement of front and back stop board.
Counter Ejector
4.Piles of 10-40 cartons can be set and sent out.
5. Board lift roller device for easy insertion of corrugated cartons at a later time.
6. Motorized adjustment of the height of sheet pressing frame.