a) Control temperature precisely and have no negative effect on temperature and comfort.

b) Controlled temperature is clearly showed with number on the products; easy to read.

c) Temperature of air conditioner are free to set as one’s pleased and temperature of energy saver will do the same as temperature of air conditioner; only if they have the same temperature has it perfect energy saving effect.

d) Stable equipment performance, Energy saving rate is usually 15% ~35%.

However, the energy saving ratio is higher in spring and autumn than in summer. It is up to 45% by the test in apparatus room of northern cities.

e) The design of electric circuits is adjusting and up-grading, it has more functions and it’s more scientific, more reliable and safer.

f) It has malfunction alarm; once malfunction occurs, it will send out the signal so as to be maintained promptly. It is the function that superior to other energy savers which is without malfunction alarm. 

g) It's easy to install without disassembling air conditioner; original functions of control and protection still are maintained, so it has no impact on the maintenance of air conditioner.

h) It is not only apply to traditional fix-speed air conditioner but also the frequency conversion air conditioner and low power central air conditioner.

i) Three-phase air conditioner energy saver of apparatus room has the function of power filtration and help to improve the energy saving effect.

j)They can be used in any environment, any places, any seasons; they do have the same energy saving effect in following three conditions:air conditioner’s cooling in summer, heating in winter or cooling in winter.

 

Our product is easy to install and use, specific operation procedure are as follows;

a) First , open the surface cover of air conditioner and find out the air conditioner temperature detector. The temperature detector of air conditioner is on top right corner( beside the power line connection); the temperature detector of cabinet type air conditioner is above the air inlet, which is black and smooth with 2 centimeters long.

b) Insert the temperature detector of air conditioner fully into compensator box (a small aluminum box), then colligate the compensator box and temperature line firmly, preventing the temperature detector of air conditioner from dropping out, then install it well.

c) Install the temperature detector of air conditioner energy saver beside the temperature detector of air conditioner and fix it tightly.

d) Cover the surface cover of air conditioner.

e) The air conditioner energy saver is installed beside air conditioner, so it is very easy to operate and see the temperature display screen.

f) There are two function keys.Two keys are simultaneously moved down for cooling and energy saving function. And they are simultaneously moved up for heating and energy saving function. Notice that move the function keys before it is plugged in for fear that it should disorder software program.

g) For the power supply of energy saver, it can be taken from air conditioner or just plug into another socket. They both need 220V.

h)The symbol “+”, “－” are set to adjust the temperature of energy saver, “+” means rising temperature while “－”means reducing temperature. The lowest temperature can be set 16℃. The highest temperature can be set 32℃. The symbol of temperature can be remembered after being set 3 seconds. After switching on the power, it shows indoor temperature and then shows the air conditioner working temperature.

h) How much temperature is set in the air conditioner , and energy saver also do the same. They are needed to be the same temperature.

i) The comparison time of apparatus room is fine for longer time.it’s usually about 10days (if it is household or commercial air conditioner energy saver, the comparison time is just OK about 2 hours).The comparison and test had better make in the following conditions: environment is chosen with the same temperature; the power of air conditioner match usable floor space, indoor sealing performance should be good.

j)You can choose two places in a area or two places in a building. One use energy saver and another without energy saver for comparison ,they are measured by meter respectively.

k) Simple operations are as shown in the following illustration.

 

a) The main body of energy saving device and compensator box should be installed tightly, for fear that it should fell off.

b)Don’t pull the data signal wire and temperature detector wire with great force.

e)If the device is not to be used for a long time,please cut off the power.

f)Cut off the power before cleaning the device.

g) Don’t use liquid cleaning agent to clean the main body.

h) Protecting the device from water and moisture.