- Pressure clamp connectors
- Dynamic heating up
- Wide voltage range
- Temperature limiting
- Energy saving
- Clip fixing
- Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation..
| Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
| Heating element | PTC resistor, self regulating and temperature limiting |
| Heater body | extruded aluminium profile, anodised |
| Connection | 3 pressure clamps for stranded wire 0.5-1.5mm2 (with wire end ferrule) and rigid wire 0.5- 2.5mm2 |
| Connection casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 50022 |
| Fitting position | vertical |
| Operating/Storage temperature | -45 to +70 °C (-49 to +158 °F) |
| Protection type/Protection class | IP20 / I (earthed) |
| Approvals | VDE + UL File No. E150057 |
| Accessoires | screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
| Art. No. | Heating capacity* | Inrush current max. | Length (L) | Weight (approx.) |
| 14000.0-00 | 15W | 1.5A | 65mm | 0.30kg |
| 14001.0-00 | 30W | 3.0A | 65mm | 0.30kg |
| 14003.0-00 | 45W | 3.5A | 65mm | 0.30kg |
| 14005.0-00 | 60W | 2.5A | 140mm | 0.40kg |
| 14006.0-00 | 75W | 4.0A | 140mm | 0.50kg |
| 14007.0-00 | 100W | 4.5A | 140mm | 0.50kg |
| 14008.0-00 | 150W | 9.0A | 220mm | 0.70kg |
*at 20°C (68°F) ambient temperature