- Pressure clamp connectors
- Dynamic heating up
- Wide voltage range
- Temperature limiting
- Energy saving
- Clip fixing
- Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation..
| Operating voltage |
120-240V AC/DC* (min. 110V, max. 265V) |
| Heating element |
PTC resistor, self regulating and temperature limiting |
| Heater body |
extruded aluminium profile, anodised |
| Connection |
3 pressure clamps for stranded wire 0.5-1.5mm2 (with wire end ferrule) and rigid wire 0.5- 2.5mm2 |
| Connection casing |
plastic according to UL94 V-0, black |
| Mounting |
clip for 35mm DIN rail, EN 50022 |
| Fitting position |
vertical |
| Operating/Storage temperature |
-45 to +70 °C (-49 to +158 °F) |
| Protection type/Protection class |
IP20 / I (earthed) |
| Approvals |
VDE + UL File No. E150057 |
| Accessoires |
screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
| Art. No. |
Heating capacity* |
Inrush current max. |
Length (L) |
Weight (approx.) |
| 14000.0-00 |
15W |
1.5A |
65mm |
0.30kg |
| 14001.0-00 |
30W |
3.0A |
65mm |
0.30kg |
| 14003.0-00 |
45W |
3.5A |
65mm |
0.30kg |
| 14005.0-00 |
60W |
2.5A |
140mm |
0.40kg |
| 14006.0-00 |
75W |
4.0A |
140mm |
0.50kg |
| 14007.0-00 |
100W |
4.5A |
140mm |
0.50kg |
| 14008.0-00 |
150W |
9.0A |
220mm |
0.70kg |
*at 20°C (68°F) ambient temperature
