WSFMO-240 8E1 fiber optical multiplexer
General information :
4E1 fiber optical MUX is a point-to-point optical transmission equipment developed based on ultra large scale integrated circuit. Have perfect alarm function, data office telephone optional, full data electrocircuit, high reliability and stabilization, low power consumption, high integration, small bulk, easy installation and maintenance. The device is popularly with telecommunication operator.It is suitable in business for communication operator, government and kinds of entities.
Product character:
(1)High integrate design, work stabile, very low failure rate.
(2)E1 port use digital clock resume circuit and digital phase-lock circuit.
3) Voltage can select -48V/+24V/110V/220V, provide over-voltage and over-current protection, have high electromagnetism shield capability.
(4) Jitter tolerance much better than GB.
(5)Monitor remote equipment through fiber inter-band channel, display remote status on panel LED.
(6)Provide function of 8 E1 remote loop, and 1 interface of phone.
(7)Network manager interface use SNMP or RS485.
(8)Two types:Standalone, desktop, 19inch;Card,usually be inserted in our rack 19 inch.
Optical interface :
optical wavelength: 850/1310nm for multi-mode fiber, 1310/1550nm for single-mode fiber.
optical interface: SC/FC
transceiver module: > -6dBm
optical receiver sensitivity: <-36(BER<10)
receive range: >-30dB
transmission distance: multi-mode 2 Km, single-mode 40 Km, single-mode 80 Km,single-mode 120 Km.
Jitter tolerance : according with G.742 and G.823.
E1 interface :
Interface Rate: 2.048Mbps+-50ppm
Coding: HDB3
Interface standard: ITU-T G.703
interface Impedance : 75Ω(unbalance) and 120Ω(balance).
interface character: support rack (19 inch, 6u high) up to 24 directions
(1)High integrate design, work stabile, very low failure rate.
(2)E1 port use digital clock resume circuit and digital phase-lock circuit.
3) Voltage can select -48V/+24V/110V/220V, provide over-voltage and over-current protection, have high electromagnetism shield capability.
(4) Jitter tolerance much better than GB.
(5)Monitor remote equipment through fiber inter-band channel, display remote status on panel LED.
(6)Provide function of 8 E1 remote loop, and 1 interface of phone.
(7)Network manager interface use SNMP or RS485.
(8)Two types:Standalone, desktop, 19inch;Card,usually be inserted in our rack 19 inch.
Optical interface :
optical wavelength: 850/1310nm for multi-mode fiber, 1310/1550nm for single-mode fiber.
optical interface: SC/FC
transceiver module: > -6dBm
optical receiver sensitivity: <-36(BER<10)
receive range: >-30dB
transmission distance: multi-mode 2 Km, single-mode 40 Km, single-mode 80 Km,single-mode 120 Km.
Jitter tolerance : according with G.742 and G.823.
E1 interface :
Interface Rate: 2.048Mbps+-50ppm
Coding: HDB3
Interface standard: ITU-T G.703
interface Impedance : 75Ω(unbalance) and 120Ω(balance).
interface character: support rack (19 inch, 6u high) up to 24 directions