Caution:
Though our product is equipped with protection, please make sure to use electric current lower than 10 Amperes to avoid any damage to the system.
Installation Manual：
1. Provide matching connection accessories to resellers according to various types of automotive sound systems.
2．According to the connection diagram or sound system connection wires, find out the power lines and 8 loudspeaker wires. Cut the positive wire and negative wire from the 1/3 position to the "Plug” and also 8 loudspeaker wires, then peel off the insulator to expose the 6mm bronze wires
3．Unscrew and open the sliver cover from both sides of the module, take out the audio module.
4．Connect the "Outlet” wires to the "IN” side of audio module, and connect the "Plug” wires to the "OUT” side of the module.
５．Pull the peeled-off bronze wire through the silver cover and insert into the corresponding module holes, then fasten the screw.
Positive power line connects with "+”, negative connects with "-”; the loudspeaker wire should be connected to holes 1-8 according to the connecting diagram. But the loudspeakers lines of the "IN” side and "OUT” side should match each other, otherwise the sound effect will be jeopardized.
Maintain the same sequence on the "OUT” side.
6．"OUT” side should follow the same connection method and the same sequence as the "IN” side.
(e.g. Hole No.1 connects with green wire, hole No.2connects with dark green wire. Same on the OUT side.)
7．Check to see whether the connection sequences on the "IN” and "OUT” side are the same, then close the silver cover, pull out the original sound system and connect with the module.
The reference table of general original sound system output line:
Black: grounding line
Yellow: firing line
White: positive electrode of front left loudspeaker
Dark White: negative electrode of front left loudspeaker
Grey: positive electrode of front right loudspeaker
Dark Grey: negative electrode of front right loudspeaker
Green: positive electrode of back left loudspeaker
Dark Green: negative electrode of back left loudspeaker
Purple: positive electrode of back right loudspeaker
Dark Purple: negative electrode of back right loudspeaker
Caution: The module output line should match the input line.