DREAMBOX DM-7020si

This is truly the future of satellite viewing. The DM7020-S is a digital satellite receiver with full Ethernet communication capabilities.Power PC driven with Linux operating system for endless possibilities.This Dreambox 7020 Si digital satellite receiver with full Ethernet communication capabilities.Power PC driven with Linux operating system for endless possibilities, 250 MHz PowerPC Processor(350 Mips).

- 250 MHz PowerPC Processor(350 Mips)- Linux open source (most parts under the terms of GPL)- Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)- 1 x DVB Common-Interface Slot- 2 x Smartcard-Reader- Integrated Compact Flash Interface Slot- MPEG2 Hardware decoding (fully DVB compliant)- Common NIM DVB-S- 10/100 MBit compatible Ethernet Interface- modem- USB Port- 12V switch cinch- V.24/RS232 Interface- Big-size LC-Display- 32 MByte Flash- 96 MByte RAM- integrated IDE UDMA66 Interface- Support for internal HDD in any capacity- unlimited channel lists for TV/Radio- channel-change time < 1 second- full automatic service scan- supports directly bouquet-lists- supports EPG (electronic program guide)'- supports own videotext- supports multiple LNB-Switching control (supports DiSEqC)- fully adaptable OSD in many languages and skin-support- S/PDIF Interface for digital bit stream out (AC-3)- 2 x Scart-interfaces- RF modulator- Audio/Video cinch out- MINI-DIN connector for extern IR (send)

DreamBox DM7020 technical data

DBS-Tuner:Frequency Range 950 . 2150 MHzSignal Level - 65 dBm . - 25 dBmSignal-to-Noise Level 12 dB max.DBS-Tuner Input Connector F-Type femaleInput Impedance 75 OhmAFC +/- 3 MHzDemodulation Shaped QPSKFEC Viterbi and Reed-SolomonViterbirate 1/2, 2/3, 3/4, 5/6, 7/8Roll-off Factor 35 %Demultiplexing according ISO 13818-1

Common-Interface:Common-Interface Power Consumption max. 0,3A/5VVideo decoder:Video Compression MPEG-2 and MPEG-1 compatibleVideo Standard PAL G/ 25 HzVideo Formats 4:3 / 16:9Letterbox for 4:3 TV-DeviceAudio decoder:Audiokompression MPEG-1 &mp; MPEG-2 Layer I and IIAudio Mode Dual (main/sub), StereoFrequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHzOutput analog:Output Level L/R 0,5 Vss on 600 OhmTHD > 60 dB (1 kHz)Crosstalk < -65 dBOutput digital:Output Level 0,5 Vss on 75 OhmSampled Data Filtering 32 kHz, 44.1 kHz, 48 kHzS/PDIF-Output optical (AC3)

Video parameter:Input Level FBAS 1 Vss +/- 0.3 dB on 75 OhmTeletext filter in conformity with ETS 300 472 Standard>

TV-Scart:Output: FBAS, RGB, S-Video over OSD selectable

VCR-Scart:FBAS

Serielle Interface RS 232:Typ RS232 bidirectionalBitrate 115,2 kBit/s max.Plug Connector SUB-D-9Function: Update of Firmware

Ethernet:10/100 MBit compatible interfaceFunction Update of Firmware

USB:USB 1.2 connector

Mini DIN:I2C for steering of external devicesIR funktion  Pins:  1    5V  2    SDA (I2C-Kanal 2)  3    SCL  4    3,3V  7    GND  8    IR-Output  9    GND

UDMA66 IDE Interface:Intern for connect HDDCompact Flash - Reader

LNB power and polarisation:LNB Current 500mA max. ; short-circuit-protectedLNB Voltage vertical < 14V no load, > 11,5V at 400mALNB Voltage horizontal < 20V no load, > 17,3V at 400mALNB shut-off at Standby-Mode

Count of active satellite position:DiSEqC 1.0/1.2 SAT POSITION / SAT OPTIONDiSEqC - Rotor Control

Power consumption:< 20W (in operation, horizontal polarization / 400mA LNB current)< 11W (in operation, no LNB)< 4W (Deep-Standby-Mode)

Input voltage:230V / 50 Hz alternating current +/- 15%

Physical specification:Ambient Temperature +15°C...+35°CHumidity < 80%Size (W x D x H): 374 mm x 230 mm x 75 mmWeight: 1,8 kg  without HDD