Key Specifications/Special Features of Front End Loader:
- Technical data FTLD200 FTLD400 FTLD600 FTLD800
- Maximum lift height - measured at pivot pin (mm)2400 2800 3000 3150
- Maximum lift height - under level bucket (mm) 1650 2000 2200 2300
- Maximum dump reach (mm) 600 600 930 1200
- Dump angle (degrees) 42 42 42 42
- Reach with bucket on ground (mm) 1900 1800 1950 2300
- Rollback angle on ground (degrees) 40 45 45 45
- Maximum digging depth (mm) 100 100 110 110
- Rated load (kg) 260 360 600 800
- Bucket capacity (m3) 0.2 0.3 0.46 0.6
- Pallet fork length (mm) 800 1030 1240 1240
- Pallet fork width (mm) 800 960 1184 1200
- Pallet fork load (kg) 260 360 600 800
- Jinma series tractor
- Bucket size: 50 inches
- Bucket capacity: 7.06 cubic feet
- Maximum lift height: 98 inches
- Clearance with bucket dumped: 80 inches
- Reach at maximum height: 16 inches
- Maximum dump angle: 16 degrees
- Reach with bucket on ground: 59 inches
- Bucket rollback: 17 degree
- Digging depth: 6 inches
- Overall height in carry position: 61 inches
- Lift capacity to full height: 875lb
- Breakaway capacity: 2,200lb (load at which entire system will collapse)
- Hydraulic control valve: two spool selective control valve for loader and bucket cylinders
- Lift bucket and cylinders: double acting
- Bucket control: hydraulic twin cylinder
- Bucket cylinder size (twin) 2 bore x 23 inches stroke
- Lift cylinder size: 2 bore x 23 inches stroke
- Approximate weight (less mounts) 597lb
- Raising time: 6.5 seconds
- Lower time: 5.0 seconds
- Bucket dump time: 5.0 seconds
- Bucket rollback time: 4.0 seconds