This fuse equipment can auto-complete <3M length of the various specifications of the diameter of 1.5-2MM of fuse wire rope. Equipment used to send servo motor line in order to ensure an accurate length of the fuse; the use of electrodes so that the fuse section neatly spread without burr-free; the use of touch-screen film set to change the length of the fuse quickly and conveniently.Mainly used in automobile industry.

Option:

 a. Equipment consists of three parts: motor automatically lines, to send automatic servo motor line, automatic electrode fuse;

 b. On the cylinder to bowl fast and take-off and landing light;

 c. Groups will be moving pulley and pulley used to enhance the efficiency of the actinomycetes;

 d. Moving pulley so that when equipped with wire line in order to reuse the same size of the force Bengzhi is conducive to precise length;

 e. Servo motor used to send lines can be timing belt to ensure accurate length;

 f. Use of electrodes fuse wire rope to ensure product quality and high efficiency;

 g. Using PLC control and easy to change the program.

 h. Operation buttons and touch-screen film can be read and to facilitate the operation;

 i.. Processing wire rope after falling into the automatic feed me;

 j.. Reserved for the air blowing smoke to clear impurities and eliminate smoke;

 k. Error and air line sound and light alarm;

 l. Equipment with self-locking device to open the door, open the door does not allow automatic operation of the equipment, only to allow manual debugging. To ensure safety;

 The overall size of equipment : 3600x1200x1700mm (LxWxH)

 The application of the type of product:

 Φ1-2mm 3000mm within the length of the wire rope

 Break accuracy <3mm

 Equipment efficiency:

 The completion of a product cycle up more than 10 seconds;

 Preparation of the conditions of use---

 Pressure: 6bar MAX: 2000l/min

 Power: 220V/50HZ 10KVA

Remark:  The above is our standard product. Other customized products available according to customer demand and different specifications.