Detailed Product Description 1) YES1-100HB: 3P, 4P, 16-100A2) YES1-160HB: 3P, 4P, 100-1603) YES1-250HB: 3P, 4P, 200-250A4) YES1-400HB: 3P, 4P, 400A5) YES1-630HB: 3P, 4P, 630AIt has a logic control board,different logic commands to control the operation ofthe gear-motor directly assembled in the switch to ensure the position of the switch. The gear motor is made of neoprene to insulate wetness and heat, has a safety device. It will trip off when the temperature is over 110°C and when it is under over current status, when the trouble is disappear, then device will automaticallu resumes its work, the reversible reduction gear adopts straight tooth gear. About the operation:when the key is under automatic starts,this kind ATS will self-inputand self-recovering ,once the hand is emergency operation, It'll return back afterdelay time about 60s Through terminal is 102.103 to force remote control turnto"0" Position.optimum selection of switches 202.204. Emergency manual operation, touse the hand turn the 90° at each position.REGULATE INSTRUCTIONWhen use operating handle, operated switch on/off three times, it should be operatedneatly. Full-automatic regulation: discharge handle, connect with relative line,start electric lock, turn on common and reserve power, the switch should transferto "I" position, then cut off common power, the switch should transfer to "II"position; turn on common power again, the switch should transfer to "I" positionback.Compulsory "0" regulation: When common power working, start compulsory "0" self-lock button, the switch should transfer to "0" position; when reserve power working,start compulsory "0" self-lock button, the switch should transfer to "0" position.Long range control regulation: When common power working, start "II" button, theswitch should transfer to "II" position; when reserve power working, start "I" button,the switch should transfer to "I" position; Exam signal indicator light: When common/reserve power is on/off, switch "I/II"making and breaking, electric/mechanic padlock is on/off, any signal indicator lightshould indicate relatively.After regulation, close down the power first, transfer switch to position "0" withhandle.After install, discharge electric key and operating handle and keep respectivelypreventing accident.

 

Automatic Transfer Switch ( ATS )