Portable  engrave  letters  machine

you can see  the  video  of  the   product’s  operation   in  my  website. Could  be ordered  5-10 pieces  every  time.

specification:  The  subject  product is  suitable  for  engraving  on   materials  of metal  ,  porcelain .marble   and glass .

Front-end  of  machine ,there  is a  Tool  bit. The  tool  bit will  be Quivered  when the machine is working  . is  quiver  ,no rotation .  so  it is  not be used  like  Die  grinder .

The  machine worked  like  a pen , if  you engrave a word , the word  is like  you handwrite.  Not like  the  print.  Sometimes ,moulds can be used to make  better.

The  top of  the  tool  bit  like the  top of the  needle, when it  is dulled. can used  “grinding  machine”   to  make it  sharp

the  product  is  very  populated  for  its  compact  and  portable  feature  , compared with same kinds other  machine , low noise, low shaking . you can  used it  to put a mark  in many  hard  materitals as  you want,  The dealers  or  manufactures will  not  be  confused  for retured   product  when    their  product  was engraved  before  its shipping out the plant.

Voltage:  220V    

Power:   25W

Degree:    degrees  button  is  on the  back  of  manhine

Work  process:  1. plug the  power

               2. select  one degree  by the button  on  the  back  of  machine

               3. put down the  button  in  Front-end  of  machine. Move gently on the surface  which  you  want engrave .  Now it is  working, loosen the button, it will be stop .

Caution:  1.     The  product  should  not  be in usage  by  exceeding  20 minutes  in  case  of  the coil is  overheated .

2.        to make sure the  product is  not  with  creepage for  your safety  reason.

3.       put  the  tool  bit  gently on the surface  which  you  want engrave. heavy strength maybe  damaged  the machine.

4.       please  keep  this  product  out  of  children  to prevent  accident.