| Model Number: | MF-500 |
|---|---|
| Brand Name: | Yuelon |
| Place of Origin: | China (Mainland) |
| Condition: | New |
| Warranty: | 12 months |
| Power: | 500KW |
Quick Details
Specifications
Main characteristics:
1. voltage feedback design and adopt IGBT based LC series resonance circuit
2. IGBT inversion technology ,high energy conversion over 97.5%
3. energy saving 10-30% compared with SCR technology. In series resonance circuit, induction coil with high voltage and low current, so energy loss is very low. Soft switch technology applied then switch loss is very low.
4. it can be started up 100% under any condition.
5. 100% duty cycle , 24 hours continuous working ability at maximum power.
6. less harmonic current and high power factor. Power factor always remaining 0.95 above during machine running.
7. the frequency tracking automatically technology enables power factor to remaining high level throughout heating process.
8. Good reliability, IGBT is a self turn-off transistor that ensures inversion with success and takes protection instantly; IGBT used from infineon company, world-renowned manufacturer.
9. easy to operate and maintain, IGBT MF induction generator is easy to prevent and maintain due to its simple circuit structure. It has perfect protection.
The main specifications:
|
Models |
Rated output power |
Frequency rage |
Input current |
Input voltage |
Duty cycle |
Water flow |
weight |
Dimension |
|
MFS-100 |
100KW |
0.5-10KHz |
160A |
3phase 380V 50Hz |
100% |
10-20m3/h |
180KG |
620x680x1630mm |
|
MFS-160 |
160KW |
0.5-10KHz |
260A |
10-20m3/h |
220KG |
720x 780 x 1800mm |
||
|
MFS-200 |
200KW |
0.5-10KHz |
330A |
10-20m3/h |
230KG |
820x 780 x 1800mm |
||
|
MFS-250 |
250KW |
0.5-10KHz |
400A |
10-20m3/h |
245KG |
820x 780 x 1800mm |
||
|
MFS-300 |
300KW |
0.5-8KHz |
500A |
25-35m3/h |
350KG |
920x 930 x 1950mm |
||
|
MFS-400 |
400KW |
0.5-8KHz |
670A |
25-35m3/h |
360KG |
920x 930 x 2080mm |
||
|
MFS-500 |
500KW |
0.5-8KHz |
750A |
25-35m3/h |
600KG |
1500 x 800 x 2000mm |
||
|
MFS-600 |
600KW |
0.5-8KHz |
1000A |
25-35m3/h |
620KG |
1500 x 800 x 2000mm |
||
|
MFS-750 |
750KW |
0.5-6KHz |
1300A |
50-60m3/h |
630KG |
1500 x 800 x 2000mm |
||
|
MFS-800 |
800KW |
0.5-6KHz |
1500A |
50-60m3/h |
650KG |
1500 x 800 x 2000mm |
||
|
MFS-1200 |
1200KW |
0.2-4KHz |
2000A |
50-60m3/h |
920KG |
2500x1000 x 2000mm |
||
|
MFS-1500 |
1500KW |
0.2-4KHz |
2500A |
50-60m3/h |
1020KG |
2500x1000 x 2000mm |
Applications:
Hot forging: fastener, hardware tool, automobile/ motor cycle parts. E.g: shaft, gear, axis,crank shaft, cam shaft, clutch and fork.
How to select the induction heating equipment?
There are two main parameters of induction heating equipment, one is the output power, another is the frequency.
The depth of heat penetration into the workpiece depends on the frequency,the higher the frequency,the shallower the skin depth;the higher the frequency,the deeper the penetration. the frequency,the shallower the skin depth;the higher the frequency,the deeper the penetration.
So it is important to select the frequency of the induction heating machine according to the heating desire to achieve best heating effect.
The output power decide the heating speed, so power is selected according to the weight of the workpiece and the heating temperature
and desired heating speed.
Call or e-mail us now, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for you.