Specifications
- Main box contains 5 buttons and 4 display panels
- 5 buttons:
- Mode select
- Time up
- Time down
- Start or stop
- On or off
- 4 panels:
- Mode (4 modes for selection)
- Work pressure (voltage)
- Work electricity (ampere)
- Time (treatment time in minutes)
- Operation procedures:
- Insert power cord and array into corresponding jacks in chassis
- Place array into basin filled with water and then turn power on and press on/off button
- Time and work pressure will show accumulative treatment time used
- Work pressure indicates number of hours
- Time indicates number of minutes used
- Total amount of time used is up to 60 minutes
- There will be an increase in one hour shown in work pressure panel
- Example:
- If total accumulative time used is one hour twenty minutes work pressure panel and the time panel will display number 002 and 20 respectively
- When accumulative time showing step is completed the whole device will be back to steady state of operation
- Time shows at 30 minutes
- Predetermined treatment time
- Mode shows at 1, that is mode number 1 and predetermined treatment mode
- There are 4 modes for selection with mode number 4 is strongest and number 1 is weakest among 4 modes
- Work pressure shows word off
- Work electricity shows at 0.00