Product Main

Specifications

No.
Hot-press Type
Hot-Press Plate Size
Application
1
 　BY133×7/13 Hot-press
2250×1150
 　Produce 3×7 ruler fiber board
2
 　BY134×8/20 Hot-press
2650×1370
 　Produce 4×8 ruler fiber board
3
 　BY414×8/8 Pole Type Transverse Hot-press
2700×1370
 　Produce 4×8 agglutinate board
4
 　BY514×6/4 Box type Hot-press
2100×1370
 　Produce 4×6 agglutinate board
5
 　BY523×7/6 Box type Hot-press
2400×1150
 　Produce 3×7 agglutinate board
6
 　BY814×8/4 Beforehand Monolayer Hot-press
2640×1500
 　Produce 4×8 agglutinate board
7
 　BY524×6/6 Box type Hot-press
2100×1370
 　Produce 4×6 agglutinate board
8
 　BY814×6/4 Beforehand Monolayer Hot-press
2100×1500
 　Produce 4×6 ruler fiber board
9
 　BY115×5/10 Insulative Hot-press
1500×1500
 　Produce insulative board
10
 　BY133×4/8 Middle Density Hot-press
1750×4100
 　Produce middle density fiber board
11
 　BY524×4/3 Box Type Hot-press
520×480
 　Produce chair board
12
 　BY524×4/3 Box Type Hot-press
1380×1380
 　Produce 4×4 ruler agglutinate board
13
 　BY114×5/15 Shuttle board Hot-press
1400×1200
 　Produce bamboo plywood board
14
 　BY133×7/13 Bamboo plywood hot press
2250×1150
 　Produce bamboo plywood board
15
 　flakeboard hot press
2100×1370
 　Produce 4×6 ruler flakeboard
16
 　flakeboard hot press
2700×1370
 　Produce 4×8 ruler flakeboard
17
 　Middle density flakeboard hot press
1400×5700
  
18
 　Middle density flakeboard hot press
1400×7500
  
19
 　Middle density Particle board hot press
2500×2500
  

Even the most used 4’ ×8’ presses, their hot platens differ in dimensions, structure, passages.. As the heart part of press, hot platens must be in coincidence with the press. In HongXin every platen be produced exactly according to customers’ drawing and requirements.

3’ ×6’, 4’ ×8’, 5’ ×10’ and other customer specifics within 3.5m wide and 12m long are all can be produced in our company!

Our engineer would also like to design the drawing for you according to your requirements. Single passage, double passages, even three passages are available. Other requirements, such as surface roughness, parallel and flat will be as per your requirements