ATMEL AT91SAM9261S processor

64MB SDRAM, 256MB NandFLash

8-16MB Nor Flash, 1Kbit EEPROM, 4MB Data Flash

DM9000AEP (Ethernet Controller)

+3.3V and +1.2V LDO

6-layer RF-4 PCB

200-pin gold finger Expansion Connector

Size: 67.7×47 mm

SO-DIMM 200pins board-to-board connector (Tyco, +1.8V)

One 9-wire RS232 port

One 5-wire RS232/TTL port

One RS485 port or one 3-wire TTL serial port

One 3-wire RS232/TTL port (Debug unit)

One 10/100Mbps Ethernet port

One CAN-bus port with photo coupler and DC-DC isolated module

Standard VGA display port (CH7026)

One TFT-LCD display port, default 240*320/16bit resolution,TTL (MAX:2048*2048/16bit)

3.5inch TFT-LCD display module with touch panel (NMA35QV65-B1-K01)

Four-channel 12-bit ADC (for Touch panel)

Two USB2.0 host full-speed ports

One USB2.0 device full-speed port

SPI expansion port (The SPI signal is multiplexing with CAN-bus controller)

Two programmable keypad and LEDs

+5V DC power input port

Audio output port

SD card slot

 4×4 Keypad port

13×GPI/O

RTC with rechargeable battery

Size: 141.4×109×33mm

Pre-load Linux2.6.24 operation system and uboot1.1.5

Working Temp. : 0 to 70℃ (including daughter board, mother board and 3.5inch TFT-LCD)

The schematic diagram (PDF) and user manuals (English) are available in CD-ROM