Product Main

Specifications

Touch-screen remote control switch:
Applicable range:
Family, office, market, hotel, hospital, warehouse etc.
Product parameters:
1. Ultrathin, pure flat style, remote control 86*86*28mm
2. Operating voltage: AC110~240V AC180~250V(50/60Hz)
3. Operating frequency: 315MHZ 433MHZ 430MHZ 303MHZ
4. Ultra-low power consumption design and standby electric current: 220V 50uA(power consumption is less than 0.01W)
5. Distance of remote control: within 50 meters(you can choose any type of the remote controller of our company)
6. Load power: the maximum resistive load of single route is 500W.
7. Environmental temperature : -4F~176F
8. Sensitivity: -105dB
Product characteristics:
1. Convenient installation----replace the original wall switch directly and there is no need to change the connections of the lamps and lanterns.
2. Applicable lamps and lanterns----fluorescent lamp, energy-saving lamp, incandescent lamp, spotlight, halogen lamp etc.
3. Lightning protection design----holding the lightning protection function, safe and reliable performance.
4. Partition remote control----remote control behind partition wall(you can remote control the lamps of the living room in the chamber)
5. Non-interference----non-interference among the products of the same type in the neighbors.
6. Keeping off when electricity coming----after power cut, the switch keeps off to avoid waste of electricity.
7. Bidirectional control----you can use the wall switch to control and it is more convenient to use the remote controller.
8. Centralized remote control----a multikey remote controller can control all the remote control switches of the family.
9. Group control function----you can set any key of the remote controller to control any multiplex switch, to make the lamps on or off at the same time.
10. Main switch----you can set a main on key and a main off key, so you can turn on or turn off all the lamps conveniently.
11. Learn and distinguish----the switches can distinguish any remote controller of the company, you can buy the switches and the remote controller separately and with freedom, upgrade and collocate all by yourselves.